Bedienungsanleitung Bosch Condens GC7000WP (Seite 8 von 12) (Englisch)

780622

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Maintenance

Condens 7000 WP – 6721841196 (2022/02)

5.2 Decommissioning when there is a risk of frost

If the appliance remains switched off:

▶ Make sure that a sufficient flow rate is possible at all radiators.

If the wall mounted gas condensing boiler is switched off:

▶ Put the ON/OFF switch at the control panel to position “0”.

▶ Close the gas valve under the wall mounted gas condensing boiler.

▶ Drain the entire heating system.

Fig. 7 Draining the heating system

6 Maintenance

HInspection and service

The system operator is responsible for ensuring the

heating system is used safely and in an

environmentally-sustainable manner.

If maintenance or inspections are omitted or

incorrectly carried out, this can cause personal injury

and even danger to life or material damage.

▶ Have work carried out only by an approved

contractor.

▶ Have the heating system inspected by an approved

contractor at the defined maintenance intervals.

( Inspection and maintenance interval, p. 3).

▶ Have the necessary maintenance carried out

directly.

▶ Have defects in the heating system rectified

immediately irrespective of the specified

maintenance interval.

Topping up the heating water

Topping up the heating water is different on every heating system. You

should therefore ask your specialist to show you how it is done.

NOTICE

Material damage due to thermal stresses!

When topping up a hot boiler with cold heating water, thermal stresses

can lead to cracking due to internal stress.

▶ Only fill the heating system when cold. Maximum flow temperature

40 °C.

Maximum pressure of 3 bar at maximum heating water temperature

must not be exceeded (pressure relief valve will open).

Bleeding radiators

If radiators heat up at different rates:

▶Bleed radiators.

6.1 Cleaning and care

To clean the boiler:

▶ Do not use abrasive or aggressive cleaning agents.

▶ Clean the casing with a damp cloth (soapy solution).

7Faults

7.1 Troubleshooting

The cause of the fault is coded (e.g. fault code 228) and displayed as

text.

▶ Switch the device off and back on again.

-or-

▶ Press the  and  keys until Reset is displayed.

The appliance resumes operation and the current flow temperature is

displayed.

If a fault persists:

▶ Contact the contractor or customer service.

▶ Provide them with the displayed fault code and the device data.

Table 5 Device data to be communicated in case of a fault

8 Environmental protection and disposal

Environmental protection is a fundamental corporate strategy of the

Bosch Group.

The quality of our products, their economy and environmental safety are

all of equal importance to us and all environmental protection legislation

and regulations are strictly observed.

We use the best possible technology and materials for protecting the

environment taking account of economic considerations.

Packaging

Where packaging is concerned, we participate in country-specific

recycling processes that ensure optimum recycling.

All of our packaging materials are environmentally compatible and can be

recycled.

Used appliances

Used appliances contain valuable materials that can be recycled.

The various assemblies can be easily dismantled. Synthetic materials are

marked accordingly. Assemblies can therefore be sorted by composition

and passed on for recycling or disposal.

Old electrical and electronic appliances

This symbol means that the product must not be disposed

of with other waste, and instead must be taken to the waste

collection points for treatment, collection, recycling and

disposal.

The symbol is valid in countries where waste electrical and

electronic equipment regulations apply, e.g. "European Directive 2012/

19/EC on old electronic and electrical appliances". These regulations

define the framework for the return and recycling of old electronic

appliances that apply in each country.

0010017375-001

Device data

Device designation1)

1) You can find this on the underside of the appliance.

Serial number1)

Commissioning date

System installer

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch Condens GC7000WP Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch Condens GC7000WP

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info