697152
6
Zoom out
Zoom in
Vorherige Seite
1/12
Nächste Seite
6720856748 (2016/03) CR50
6 | Operating the appliance
Set heat begin or setback begin earlier or later
(move switching time)
Open time program for all weekdays or one weekday.
Select and confirm the switching time.
The hour currently set for the switching time and the
associated segment in the segment display start to flash.
Moving switching time to the desired time.
The setting in the value display changes in 15-minute
increments and in the segment display in 30-minute
increments.
Confirm setting.
Add a new heating phase (such as Heat begin2 to Strt
setback2)
If all six switching times in the time program are not being used,
a new heating phase can be added.
Open time program for all weekdays or one weekday.
Select and confirm Heat begin2.
The new switching time is added. The hour and associated
segment in the segment display start to flash.
Set the switching time for Heat begin2, such as 14:00, and
confirm.
The new heating phase is added with a duration of one half-
hour. Strt setback2 is set to 14:30. If necessary, move
Strt setback2 to, for example, 23:00.
Interrupt heating phase with setback phase (e. g. add
setback phase between Heat begin2 and Strt setback2)
Open time program for all weekdays or one individual
weekday.
Select Strt setback2 (end of the heating phase to be
interrupted).
▶Set Strt setback2 to the start of the interruption, such as
18:00.
Add a new heating phase and set heat begin and setback
begin, such as Heat begin3 (21:00) to Strt setback3,
(23:00).
The user interface automatically sorts the heating phases
chronologically.
Delete new heating phase (such as Heat begin2 to Strt
setback2)
Open time program for all weekdays or one individual
weekday.
Select and confirm Strt setback2.
The hour currently set for the switching time and the
associated segment in the segment display start to flash.
▶Set Heat begin2 to the same time as Strt setback2.
Does Delete? appear in the text line?
Confirm Delete? to delete the heating phase.
4.4 Setting up a holiday program
Open the vacation menu
Open the main menu.
Select and confirm the Holiday menu.
The menu item Holiday prog. is displayed.
Activate the holiday program and set the vacation time
Select and confirm the Holiday menu until the OFF setting
value flashes.
0010006011-001
Strt setback1
Strt setback1
0010006012-001
Heat begin2
Heat begin2
0010006013-001
Strt setback2
Strt setback2
0010006014-001
Strt setback3
Strt setback3
0010006016-001
Delete?
Delete?
0010006017-001
Holiday prog.
Holiday prog.
6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Bosch CR 50 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Bosch CR 50

Bosch CR 50 Installationsanweisung - Englisch - 12 seiten

Bosch CR 50 Bedienungsanleitung - Holländisch - 12 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info