Bedienungsanleitung Bosch CSG656BS1 (Seite 15 von 64) (Englisch)

590933

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Operating the appliance en

6. Set the type of heating and temperature for heating

up, then start the appliance operation.

7. Keep the kitchen ventilated while the appliance is

heating up.

8. Stop the appliance operation after the indicated

duration. Press the ÿ On/Off button to switch off the

appliance.

9. Wait until the cooking compartment has cooled

down.

10. Clean the smooth surfaces with soapy water and a

dish cloth.

11. Empty the water tank and dry the cooking

compartment.

Notes

■ So that the appliance adapts to a new installation

location after moving house, reset the appliance to

the factory settings. Repeat the initial use settings

and the calibration.

■ The appliance saves the calibration settings, even in

the event of a power cut or disconnection from the

mains. The calibration must not be repeated.

Cleaning the accessories

Clean the accessories thoroughly using soapy water

and a dish cloth or soft brush.

1Operating the appliance

Operating the appliance

You have already learnt about the controls and how

they work. Now we will explain how to set your

appliance. You will learn about what happens when you

switch the appliance on and off, and how to select the

operating mode.

Switching the appliance on and off

Before you are able to set the appliance, you must

switch it on.

Note: The childproof lock and the timer can also be set

when the appliance is switched off. Certain displays and

notes, such as those relating to the residual heat in the

cooking compartment, remain visible on the display

after the appliance has been switched off.

Switch off your appliance when you do not need to use

it. If no settings are applied for a long time, the

appliance switches itself off automatically.

Switching on the appliance

Press the ÿ On/Off button to switch on the appliance.

The Bosch logo appears on the display, followed by the

selection list for the types of heating.

Note: In the basic settings, you can specify which

operating mode should appear after the appliance is

switched on. ~ "Basic settings" on page 23

Switching off the appliance

Press the ÿ On/Off button to switch off the appliance.

Any functions that may be running are cancelled.

The time, or if applicable, the residual heat indicator,

appears on the display.

Note: You can set whether or not the time should be

displayed when the appliance is switched off in the

basic settings. ~ "Basic settings" on page 23

Starting the operation

You must press the l Start/Stop button to start each

operation.

After starting the appliance, the time display is shown

on the display along with the settings. The display ring

and the heating line also appear.

Pausing the operation

You can also interrupt and then continue an operation

using the l Start/Stop button.

If you press and hold the l Start/Stop button for

approx. 3 seconds, the operation is cancelled and all

settings are reset.

Note: The fan may continue to run after an operation

has been paused or cancelled.

Heating up

Type of heating Top/bottom heating

Temperature 240 °C

Duration 30 minutes

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch CSG656BS1 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch CSG656BS1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info