Bedienungsanleitung Bosch D-tect 120 (Seite 13 von 229) (Alle Sprachen)

786290

Zoom out

Zoom in

Vorherige Seite

1/229

Nächste Seite

English | 13

as building plans and photographs taken during con-

struction, etc. before carrying out any drilling, sawing

or routing work on walls, ceilings or floors. The accur-

acy of the measuring tool may be affected by environ-

mental influences, such the level of humidity or there be-

ing other electronic devices nearby. The structure and

condition of the walls (e.g. damp, building materials con-

taining metal, electrically conductive wallpaper, insulat-

ing materials, tiles) and the number, type, size and posi-

tion of the objects may distort the measuring results.

uMake sure that you are properly earthed when taking

measurements. If you are not properly earthed (e.g. by

wearing insulating footwear or by standing on a ladder), it

will not be possible to locate live cables.

uIf there are gas pipes in the building, check to ensure

that none of them have been damaged after complet-

ing any work on walls, ceilings or floors.

uLive wires can be detected more easily when power con-

sumers (e.g. lamps, appliances) are connected to the

wire being sought and switched on. Switch off power

consumers and make sure that live cables are de-ener-

gised before drilling, sawing or milling into walls, ceil-

ings or floors. After performing any kind of work,

check to ensure that objects placed on the base ma-

terial are not live.

uWhen attaching objects to dry walls, and in particular

when attaching them to the substructure, check to en-

sure that both the wall and the fastening materials

have a sufficient load-bearing capacity.

Product Description and

Specifications

Please observe the illustrations at the beginning of this oper-

ating manual.

Intended Use

The measuring tool is intended for the detection of objects in

walls, ceilings and floors. Depending on the material and

condition of the base material, it is possible to detect metal

objects, timber joists, water-filled plastic pipes, conductors

and cables.

The measuring tool complies with the limits of the standards

specified in the declaration of conformity.

On this basis, clarification is required as to whether the

measuring tool can be used in places such as hospitals, nuc-

lear power plants and in the vicinity of airports and mobile

phone base stations.

The measuring tool is suitable for indoor use.

Product features

The numbering of the product features shown refers to the il-

lustration of the measuring tool on the graphic page.

(1) Top marking aid

(2) Left-hand and right-hand marking aids

(3) Concrete operating mode button

(4) Audio signal button

(5) Gripping surface

(6) Rechargeable battery/battery adapter release

buttona)

(7) Battery packa)

(8) On/off button

(9) Universal operating mode button

(10) Drywall operating mode button

(11) Display

(12) Indicator light

(13) Serial number

(14) Sensor area

(15) Battery adapter capa)

(16) Battery adapter receptaclea)

(17) Battery bay

(18) Non-rechargeable batteriesa)

a) Accessories shown or described are not included with the

product as standard. You can find the complete selection of

accessories in our accessories range.

Display elements (seefigureA)

(a) Indicator for live wires

(b) Procedure indicator

(d) Orientation arrows to determine the object’s centre

(e) Measuring indicator

(f) Service indicator

(g) Battery pack temperature monitoring indicator

(h) Interference from radio waves indicator

(i) Audio signal indicator

(j) State of charge of rechargeable batteries/non-re-

chargeable batteries

Technical data

Universal detector D-tect 120

Article number 3601K813..

Max. detection depthA)

– Concrete operating mode 120mm

– Concrete operating mode: Metal objects 120mm

Bosch Power Tools 1 609 92A 7KZ | (25.04.2022)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch D-tect 120 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info