544331
18
Zoom out
Zoom in
Vorherige Seite
1/345
Nächste Seite
18 | English
1 609 929 X40 | (30.8.10) Bosch Power Tools
en
Safety Notes
Read and observe all instructions.
SAVE THESE INSTRUCTIONS FOR
FUTURE REFERENCE.
f Have the measuring tool repaired only
through qualified specialists using original
spare parts. This ensures that the safety of
the measuring tool is maintained.
f Do not operate the measuring tool in explo-
sive environments, such as in the presence
of flammable liquids, gases or dusts. Sparks
can be created in the measuring tool which
may ignite the dust or fumes.
f For technological reasons, the measuring
tool cannot ensure 100 % certainty. To rule
out hazards, safeguard yourself each time
before drilling, sawing or routing in walls,
ceilings or floors by means of other infor-
mation sources, such as building plans, pic-
tures from the construction phase, etc. En-
vironmental influences, such as humidity or
closeness to electrical devices, can influence
the accuracy of the measuring tool. Surface
quality and condition of the walls (e.g., mois-
ture, metallic building materials, conductive
wallpaper, insulation materials, tiles) as well
as the amount, type, size and position of the
objects can lead to faulty measuring results.
Functional Description
Please unfold the fold-out page with the repre-
sentation of the measuring tool and leave it un-
folded while reading the operating instructions.
Intended Use
The measuring tool is intended for detecting ob-
jects in walls, ceilings and floors. Depending on
material and condition of the structural surface,
metal objects, wooden beams, plastic pipes,
wiring and cables can be detected. For objects
detected, the allowable drilling depth to the sur-
face of the object is determined.
The measuring tool complies with the limit val-
ues according to EN 302435. Based on this, it
must be clarified whether the measuring tool
may be used in, e.g., hospitals, nuclear power
plants and in close vicinity to airports, or mobile
phone stations.
Product Features
The numbering of the product features shown
refers to the illustration of the measuring tool
on the graphic page.
1 Marking aid, top
2 Wheel
3 Marking aid, left and right
4 Battery lid
5 Latch of battery lid
6 Handle
7 Maintenance flap
8 Serial number
9 Sensor area
10 Selection button, right
11 Start button
12 Selection button, left
13 Audio signal button
14 Setup button
15 On/Off button
16 Display
17 LED
18 Protective pouch
The accessories illustrated or described are not in-
cluded as standard delivery.
Start
Setup
OBJ_BUCH-844-006.book Page 18 Monday, August 30, 2010 10:44 AM
18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Bosch D-tect 150 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info