Bedienungsanleitung Bosch DDD97BM69 (Seite 11 von 24) (Englisch)

746831

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Trouble shooting en

Regenerating the activated charcoal filter

The activated charcoal filters must be regenerated or

replaced regularly in order to ensure that odours

continue to be eliminated effectively. The saturation

indicator on your appliance will tell you how frequently

this needs to be done.

The activated charcoal filters should be regenerated or

replaced at least every 2 months.

:Warning – Risk of fire!

Non-regenerable activated charcoal filters may catch

fire in the oven. Never try to regenerate non-regenerable

activated charcoal filters. Only regenerate regenerable

activated charcoal filters.

Note: Regenerable activated charcoal filters can be

regenerated up to ten times.

Note: Odours may develop when regenerating the

activated charcoal filter. Make sure that the room is well

ventilated and open a window if required.

Note: Regenerated air recirculation filters may be

damaged if they fall or are dropped. The damage is not

always visible from the outside. Dispose of and replace

down any regenerated air recirculation filters that fall or

are dropped.

Caution!

Risk of damage due to ingress of moisture into the

activated charcoal filter. Never clean activated charcoal

filters in the dishwasher or with a wet cloth.

1. If the activated charcoal filter can no longer be

regenerated, order a new regenerable activated

charcoal filter and use it in place of the old one.

2. Heat the activated charcoal filter for 1 hour at

100 °C in the oven (preheated) using air

recirculation mode.

3. Allow the activated charcoal filter to cool down.

Fitting the activated charcoal filter

1. Place the activated charcoal filter onto the metal

grease filter.

2. Fix the activated charcoal filter to the grille.

Resetting the saturation displays

Once you have cleaned or replaced the relevant filters,

reset the saturation indicator to stop the symbols from

flashing.

1. Make sure that the extractor hood has been

switched on.

2. Touch and hold # for approx. 3 seconds.

This resets the saturation indicators.

3Trouble shooting

Tr oubl e s hoot i ng

Malfunctions often have simple explanations. Please

read the following notes before calling the after-sales

service.

:Warning – Risk of electric shock!

Incorrect repairs are dangerous. Repairs may only be

carried out and damaged power cables replaced by

one of our trained after-sales technicians. If the

appliance is defective, unplug the appliance from the

mains or switch off the circuit breaker in the fuse box.

Contact the after-sales service.

LED lights

Defective LED lights must only be replaced by the

manufacturer, their customer service department or a

licensed technician (electrician).

What to do if water gets in

If water gets in to the appliance during cooking or

cleaning, proceed as follows:

1. Switch off the appliance.

2. Open the floor cupboard and mop up leaking water.

3. Leave the appliance switched off for 24 hours.

After this time, the appliance can be used again

without restrictions.

Malfunction table

--------

Problem Possible cause Solution

The appliance

does not work

The plug is not

plugged in.

Connect the appliance to

the electricity supply

Power cut Check whether other

kitchen appliances are

working

Faulty fuse Check in the fuse box to

make sure that the fuse

for the appliance is OK

Appliance does

not switch on.

Filter cover not

closed.

Close the filter cover fully.

The appliance

does not extend

or retract.

The circuit breaker in

the electrical box is

defective.

Call the after-sales ser-

vice.

The button illumi-

nation does not

work.

The control unit is

faulty.

Call the aftersales ser-

vice.

The lighting does

not work.

The LED lights are

defective.

Call the after-sales ser-

vice.

# or ? will flash

on the display.

The grease filter or

the activated charcoal

filter is saturated.

Clean the filter or replace

the activated charcoal fil-

ter. ~ "Cleaning and

maintenance" on page 9

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch DDD97BM69 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch DDD97BM69

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info