Bedienungsanleitung Bosch Display Mount BDS3630 (Seite 8 von 28) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

780134

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

English – 2

doing so, be aware of the torque specified on the adapter

tray(2).

Connect the connection cables that come out of the drive

unit and the control unit. It does not matter which cable is

connected to which connection for the functions to work.

When connecting the cables, ensure that the markings on

the connector and on the cable match.

Securing on the handlebars (seefigureC)

Note: The display holder must only be secured in the cyl-

indrical area of the handlebars and not in the tapered area.

To clamp a display in the centre, the handlebars must have a

cylindrical area of at least 90mm in width.

Open the clamp and bring the 1-arm socket(6), together

with the round rubber spacer(5), into the required position.

Gently tighten the clamp screw(4) so that the 1-arm

socket(6) can still move.

Adjust the tilt for the display mount by loosening and tight-

ening the screw(7). Preferably adjust the tilt without the

display or on-board computer.

In the connection between the 1-arm socket(6) and the ad-

apter tray, there are interlocking teeth, which means that it

is only possible to align the adapter tray in predefined posi-

tions. Before tightening the screw(7), make sure that the

teeth engage in one another correctly. In addition, be aware

of the torque specified on the 1-arm socket(6).

Bring the 1-arm socket(6) into its final position and tighten

the clamp screw(4). Be aware of the torque specified on the

1-arm socket(6) here too.

Thanks to the round rubber spacer(5), it is possible to move

the 1-arm socket(6) in all directions.

Removal blocker

A device attached to the display holder can be secured using

the removal blocker(8). Usage is described in the operating

instructions for the respective device.

Maintenance and servicing

Maintenance and cleaning

The display holder must not be cleaned with pressurised wa-

ter.

Use a soft cloth dampened only with water for cleaning. Do

not use cleaning products of any kind.

uHave all repairs performed only by an authorised bike

dealer.

After-sales service and advice on using products

If you have any questions about the eBike system and its

components, contact an authorised bicycle dealer.

For contact details of authorised bike dealerships, please

visit www.bosch-ebike.com.

Disposal

The drive unit, on-board computer incl. operat-

ing unit, battery, speed sensor, accessories

and packaging should be disposed of in an en-

vironmentally correct manner.

Do not dispose of eBikes and their components with house-

hold waste.

In accordance with Directive 2012/19/EU

and Directive 2006/66/EC respectively, elec-

tronic devices that are no longer usable and de-

fective/drained batteries must be collected

separately and recycled in an environmentally

friendly manner.

Please return Bosch eBike components that are no longer

usable to an authorised bicycle dealer.

Subject to change without notice.

0 275 007 3S1 | (09.06.2021) Bosch eBike Systems

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch Display Mount BDS3630 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info