Bedienungsanleitung Bosch DIVAR IP 3000 (Seite 23 von 108) (Englisch)

539170

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

– To be sure that your Bosch VMS uses the language that you need, please configure this

language in your Configuration Client. See the Online Help for details.

If a newer version of the application is stored on the Management Server, this version is

installed automatically by no-touch deployment when you log on.

To start Operator Client:

1. From the Start menu, select Programs > Bosch VMS > Operator Client.

The dialog box for logging on is displayed.

2. In the User Name: field, type your user name.

When you start the application for the first time, type Admin as user name, no password

required.

To access multiple Management Server computers simultaneously, type the user name of

a member of an Enterprise Group.

3. In the Password: field, type your password.

4. In the Connection: list, select the IP address or the DNS name of the Management Server

or Enterprise Management Server.

5. Click OK.

If dual authorization has been configured for your user group, the next logon dialog is

displayed.

A user of the configured second user group enters the required information.

The application starts.

If dual authorization is optional, just click OK again on the second logon dialog box. But

you then only have the user rights of your user group and not the potentially extended

user rights of your dual authorization group.

To quit Operator Client:

1. On the System menu, click Exit.

The application quits.

If you logged on to Operator Client as a user who is not authorized to quit the

application, the Enter Logoff Password dialog box is displayed.

2. Ask a user with corresponding user rights to enter his user name and password to

confirm the process.

Working offline

When Operator Client is disconnected from a Management Server, a respective overlay icon is

displayed in the Logical Tree on the disconnected Management Server. You can continue

working with Operator Client even if the disconnection lasts longer, but some functions are

not available.

If the connection to the Management Server is reestablished, a respective overlay icon is

displayed.

If a new configuration on a Management Server has been activated, a respective icon is

displayed in the Logical Tree on the icon of the affected Management Server and a dialog box

is displayed for some seconds. Accept or refuse the new configuration.

If your Operator Client instance is scheduled to log off at a specific point in time, this logoff

occurs even when the connection to the Management Server is not reestablished at this point

in time.

When disconnected from a Management Server, all devices are indicated with the icon. The

state overlay of a device in the Logical Tree or on a map when Operator Client is disconnected

from the Management Server

The following functions are not available in Operator Client when disconnected from the

Management Server for this connection:

5.4

Bosch Video Management System Getting started | en 23

Bosch Sicherheitssysteme GmbH Operator's Manual 2013.07 | V1 | Operator Client

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch DIVAR IP 3000 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch DIVAR IP 3000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info