Bedienungsanleitung Bosch DLN53AA70B (Seite 19 von 32) (Englisch)

773213

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

en Trouble shooting

In the dishwasher:

Note: If the metal mesh grease filters are cleaned in the

dishwasher, slight discolouration may occur. This has

no effect on the function of the metal mesh grease

filters.

■Do not clean heavily soiled metal mesh grease filters

together with utensils.

■Place the metal mesh grease filters loosely in the

dishwasher. The metal mesh grease filters must not

be wedged in.

Installing the metal mesh grease filter

1. Insert metal grease filter.

2. Fold up metal grease filter and engage the lock.

Note: Make sure that the filter lock engages properly.

Activated charcoal filter (only in circulating-air mode)

To ensure effective odour removal, the filter must be

serviced regularly.

The activated charcoal filters must be replaced at least

every 3 months.

Notes

■The activated charcoal filters are not included with

the appliance.The activated charcoal filters are

available from specialist retailers, from our after-

sales service or from our online shop.

■The activated charcoal filters cannot be cleaned or

reactivated.

■Only use genuine replacement filters. This will

ensure that the appliance performs optimally.

Removing the activated charcoal filter (only in

circulating-air mode)

Activated charcoal filters trap the odour-causing

compounds in cooking smells. They are only used for

circulating-air mode.

1. Remove the metal grease filter.

2. Remove the grille and metal grease filter.

Fitting the activated charcoal filter

1. Place the activated charcoal filter onto the metal

grease filter.

2. Fix the activated charcoal filter to the grille.

3Trouble shooting

Tr oubl e s hoot i ng

Malfunctions often have simple explanations. Please

read the following notes before calling the after-sales

service.

:Warning – Risk of electric shock!

Incorrect repairs are dangerous. Repairs may only be

carried out and damaged power cables replaced by

one of our trained after-sales technicians. If the

appliance is defective, unplug the appliance from the

mains or switch off the circuit breaker in the fuse box.

Contact the after-sales service.

Fault table

--------

Problem Possible cause Solution

The appliance

does not work

The plug is not

plugged into the

mains

Connect the appliance to the

power supply

Power cut Check whether other kitchen

appliances are working

The fuse is faulty Check in the fuse box to make

sure that the fuse for the appli-

ance is in working order

The lighting does

not work.

The LED lights

are defective.

You can read about this in the

section entitled "Replacing the

LED lights".

Customer service en

Replacing the LED lights

:Warning – Risk of electric shock!

When changing the bulbs, the bulb socket contacts are

live. Before changing the bulb, unplug the appliance

from the mains or switch off the circuit breaker in the

fuse box.

:Warning – Risk of injury!

The light emitted by LED lights is very dazzling, and can

damage the eyes (risk group 1). Do not look directly

into the switched on LED lights for longer than

100 seconds.

Important! Only use bulbs of the same type and

wattage.

1. Loosen and remove the bulb cover.

2. Unscrew the bulb and replace it with a bulb of the

same type.

3. Refit the bulb cover.

4. Plug in the mains plug and switch the circuit breaker

back on.

4Customer service

Cust omer ser vi ce

When calling us, please give the product number (E

no.) and the production number (FD no.) so that we can

provide you with the correct advice. The rating plate

with these numbers can be found inside the appliance

(remove the metal mesh grease filter to gain access).

You can make a note of the numbers of your appliance

and the telephone number of the after-sales service in

the space below to save time should it be required.

Please be aware that a visit by an after-sales engineer

will be charged if a problem turns out to be the result of

operator error, even during the warranty period.

Please find the contact data of all countries in the

enclosed customer service list.

To book an engineer visit and product advice

Rely on the professionalism of the manufacturer. You

can therefore be sure that the repair is carried out by

trained service technicians who carry original spare

parts for your appliances.

'5*6%&8%%(

E no. FD no.

After-sales serviceO

GB 0344 892 8979

Calls charged at local or mobile rate.

IE 01450 2655

0.03 € per minute at peak. Off peak 0.0088 €

per minute.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch DLN53AA70B Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info