Bedienungsanleitung Bosch DRC97AQ50 (Seite 12 von 24) (Englisch)

746515

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

en Home Connect

Manual registration in the home network

Notes

■ The extractor hood cannot be switched on during the

connection process. You can cancel the process at

any time by pressing the # symbol.

■ To connect the extractor hood to your home

network, the hood and the light must be switched off.

1. Press and hold the D button until LED 7 on the

appliance flashes.

2. Press the @ button twice to start logging into your

home network manually.

LED 2 and LED 7 will flash.

3. Follow the instructions in the app.

If the extractor hood has successfully connected, it

will automatically connect to the Home Connect app.

LED 3 and LED 7 will flash.

4. On your mobile device, follow the instructions for

manually logging into your network.

The login process is complete when LED 7 on the

appliance stops flashing and remains continuously lit.

Connecting to the app

If the Home Connect app is installed on your mobile

device, you can connect it to your extractor hood.

Notes

■ The appliance must be connected to the network.

■ The app must be open.

1. Press and hold the D button until LED 3 and

LED 7 start flashing.

2. On your mobile device, follow the instructions in the

Home Connect app.

The connection process is complete when LED 7 on the

appliance stops flashing and remains continuously lit.

Software update

Using the software update function, your extractor

hood's software can be updated (e.g. for the purpose of

optimisation, troubleshooting or security updates). To

do this, you need to be a registered Home Connect

user, have installed the app on your mobile device and

be connected to the Home Connect server.

As soon as a software update is available, you will be

informed through the Home Connect app and will be

able to start the software update via the app.

Once the update has been successfully downloaded,

you can start installing it via the Home Connect app if

you are on your local area network.

The Home Connect app will inform you once installation

is complete.

Notes

■ You can continue to use your extractor hood as

normal while updates are downloading.

■ Depending on your personal settings in the app,

software updates can also be set to download

automatically.

■ We recommend that you install security updates as

soon as possible.

Remote diagnostics

If a fault occurs, the after-sales service can use remote

diagnostics to access your appliance.

Contact the after-sales service, making sure that your

appliance is connected to the Home Connect server

and checking that the remote diagnostics service is

available in your country.

Note: For more information and to check whether the

remote diagnostics service is available in your country,

please visit the Help & Support area of the Home

Connect website for your country: www.home-

connect.com

Resetting the connection

You can reset the connections you have saved on your

home network and on Home Connect at any time.

Press and hold the w and @ buttons until LED 7 on the

appliance goes out. An audible signal will sound.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch DRC97AQ50 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch DRC97AQ50

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info