746514
7
Zoom out
Zoom in
Vorherige Seite
1/24
Nächste Seite
Operating the appliance en
7
LED display
Setting the fan
Switching on
1. Press the # button.
The fan starts at fan setting 2.
2. Press the @ or A button to set a different fan setting.
The corresponding LEDs light up on the appliance.
Note: The appliance has 3 fan settings and 2 intensive
modes.
Switching off
Press the # button.
Intensive setting
You can use the intensive setting if there is a large
build-up of odours and fumes/vapours.
Switching on
1. Press the # button.
The fan starts at fan setting 2.
2. Press the @ button twice in order to set intensive
mode 1.
3. Press the @ button three times in order to set
intensive mode 2.
The corresponding LEDs light up on the appliance.
Note: After approx. 6 minutes, the extractor hood
automatically switches back to fan setting 3.
Fan run-on time
Switching on
Press the y button.
The fan runs at fan setting 1. LED 1 on the appliance
lights up, LED 6 flashes.
After approx. 10 minutes, the fan switches off
automatically.
Switching off
Press the y button.
This immediately stops the fan run-on.
Intermittent ventilation
This function is only available in the Home Connect app.
With interval ventilation, the ventilation system switches
on and off in the selected setting for the selected time.
LED 6 flashes continuously, the LED for the selected
ventilation setting lights up on the appliance.
As soon as the ventilation duration comes to an end,
the LED for the ventilation setting you have selected
goes out. LED 6 continues to flash.
Automatic mode
Switching on
1. Press the # button.
The fan starts at fan setting 2. The corresponding
LEDs light up.
2. Press the w button.
LED 6 on the appliance lights up and the optimum
fan setting is set automatically via a sensor.
Switching off
Switch off automatic mode using the w button.
The fan switches itself off automatically if the sensor
detects no further change in the air quality of the room.
Automatic mode can run for a maximum of four hours.
LED Explanation
1 Fan setting 1
2 Fan setting 2
3 Fan setting 3
4 Intensive mode 1
5 Intensive mode 2
6 Automatic mode / fan run-on time / interval ventilation
7 Home Connect
8 Infrared receiver
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Bosch DRC99PS20 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Bosch DRC99PS20

Bosch DRC99PS20 Bedienungsanleitung - Deutsch - 24 seiten

Bosch DRC99PS20 Bedienungsanleitung - Holländisch - 24 seiten

Bosch DRC99PS20 Bedienungsanleitung - Französisch - 24 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info