746514
10
Zoom out
Zoom in
Vorherige Seite
1/24
Nächste Seite
en Home Connect
10
oHome Connect
Ho me Connec t
This appliance can be networked and also controlled
using a mobile device.
If the appliance is not connected to your home network,
it will function as an extractor hood with no network
connection and can still be operated via the display.
The availability of the Home Connect function depends
on the availability of Home Connect services in your
country. Home Connect services are not available in
every country. You can find more information on this at
www.home-connect.com.
Notes
Ensure that you follow the safety instructions in this
instruction manual and that you comply with these
even when you are away from home and are
operating the appliance via the Home Connect app.
You must also follow the instructions in the Home
Connect app.
Operating the appliance directly from the appliance
always takes priority. It is not possible to operate the
appliance using the Home Connect app during this
time.
Setting up
To implement settings via Home Connect, you must
have installed and set up the Home Connect app on
your mobile device.
Refer to the Home Connect documents supplied for
more information.
The app will guide you through the entire registration
process. Follow the steps specified by the app to
implement the settings.
The app must be open in order to perform the set-up
process.
Notes
In networked standby mode, your appliance requires
a maximum of 2 W.
If you need your device's MAC address to connect to
your home network, you can find this next to the
rating plate inside the appliance (you will need to
remove the filter to see it).
Automatic registration in the home network
Notes
You need a router that has WPS functionality.
You need to be able to access your router. If you do
not have this, follow the steps for "Manually logging
into your home network".
The extractor hood cannot be switched on during the
connection process. You can cancel the process at
any time by pressing the # symbol.
To connect the extractor hood to your home
network, the hood and the light must be switched off.
1. Press and hold the D button until LED 7 on the
appliance flashes.
2. Press the @ button.
LED 1 and LED 7 will flash.
3. Press the WPS button on the router within the next
2 minutes.
If the extractor hood has successfully connected, it
will automatically connect to the Home Connect app.
LED 3 and LED 7 will flash.
Note: If the extractor hood has been unable to
connect, it will automatically allow you to manually
connect to your home network. The LED for fan
setting 2 and the Home Connect LED will flash. Log
the appliance into your home network manually or
press the A button to try logging in automatically
again.
4. On your mobile device, follow the instructions for
automatic network login.
The login process is complete when LED 7 on the
appliance stops flashing and remains continuously lit.
Manual registration in the home network
Notes
The extractor hood cannot be switched on during the
connection process. You can cancel the process at
any time by pressing the # symbol.
To connect the extractor hood to your home
network, the hood and the light must be switched off.
1. Press and hold the D button until LED 7 on the
appliance flashes.
2. Press the @ button twice to start logging into your
home network manually.
LED 2 and LED 7 will flash.
3. Follow the instructions in the app.
If the extractor hood has successfully connected, it
will automatically connect to the Home Connect app.
LED 3 and LED 7 will flash.
4. On your mobile device, follow the instructions for
manually logging into your network.
The login process is complete when LED 7 on the
appliance stops flashing and remains continuously lit.
10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Bosch DRC99PS20 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Bosch DRC99PS20

Bosch DRC99PS20 Bedienungsanleitung - Deutsch - 24 seiten

Bosch DRC99PS20 Bedienungsanleitung - Holländisch - 24 seiten

Bosch DRC99PS20 Bedienungsanleitung - Französisch - 24 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info