DT10RF RECEIVER
PROGRAMMABLE SETTINGS
Setting individual weekend days:
NOTE: If you do not require individual weekend
times, then press set? until the normal dis-
play is shown.
If you do not wish to change the setting for SAT,
then press set? until the normal display is shown.
1. Press OK to select the day displayed.
NOTE: Speed up the display by holding down
the + or - buttons.
2. Press + or - to change the ON time.
3. Press set? to set the ON time and select the
OFF time.
4. Press + or - to change the OFF time.
5. Press set? to set the OFF time and select the
next ON time.
Repeat operations 2 to 5 to set the second and third
ON/OFF times.
NOTE: After pressing set? for the third hot water
pre-heat off time for SAT, the display will
show SET SUN. Press OK to set SUN or
press set? until the display returns to normal
mode.
Holiday settings
1. Press the set? button until SET and HDAY are
displayed.
2. Press OK, the display shows 00.
3. Press + or - to set the number of days you require
the system to be off.
4. Press set? then HDAY is shown in the display
and no demand for heating will be made from the
programmer. The programmer will return to normal
after the set number of days.
To cancel the Holiday setting and return to normal
operation, press any button.
NOTE: The programmer counts each pass through
midnight as a day.
For example, if you did not want heating
from Saturday morning until Tuesday
morning, set for three days.
DT10RF PROGRAMMER
INSTRUCTION MANUAL
8 716 115 493a (02.2009)
OPERATING & INSTALLATION
INSTRUCTIONS
19
