Bedienungsanleitung Bosch DWB128E51 (Seite 6 von 44) (Englisch, Holländisch, Portugiesisch, Spanisch)

611648

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Operation

These instructions apply to several appliance variants. It is

possible that individual features are described which do not

apply to your appliance.

Note: Switch on the extractor hood when you start cooking and

switch it off again several minutes after you have finished

cooking. This is the most effective way of removing the kitchen

fumes.

Control panel model 1

Control panel

Setting the fan

Note: Always adjust the fan strength to meet current conditions.

If there is a large build-up of steam or fumes, select a high fan

setting.

Switching on the appliance

1. Press the % button.

The fan starts at fan setting

ƒ.

2. Press the + or - button to set a different fan setting.

Switching off the appliance

Press the

% button.

Intensive setting

You can use the intensive setting if there is a large build-up of

odours and fumes/vapours.

1. Press and hold the + button until fan setting „ appears in the

display panel.

2. Press the + button.

The intensive setting

‚ is activated.

3. Press the + button.

The intensive setting

ƒ is activated.

Note: The running time of the intensive setting is approx.

6 minutes. Once this time has elapsed, the appliance

switches back to a lower fan setting.

4. Press the - button until the required fan setting is reached.

The intensive setting ends.

Fan run-on time

Press and hold the - button until ‚r appears in the display

panel.

After approx. 10 minutes, the fan switches off automatically.

Lighting

The lighting can be switched on and off independently of the

ventilation system.

Switching on or off

Press the

B button.

Setting the brightness

Press and hold the B button until the desired brightness is

reached.

Saturation display

When the metal grease filters or the activated carbon filter are

saturated, a signal sounds for approx. 4 seconds after the fan

is switched off.

The corresponding symbols appear in the display panel:

■ Metal grease filter: #

■ Activated charcoal filter: ’#

■ Metal grease filter and activated charcoal filter: # and ’#

flash at the same time

When this happens, do not delay cleaning the metal grease

filter or replacing the activated charcoal filter any further, see

section Cleaning and maintenance and follow the installation

instructions supplied with the accessories.

Resetting a saturation indicator

Press and hold the - button until the saturation indicator no

longer flashes.

The saturation indicator is reset.

Resetting the saturation displays

1. Press and hold the - button until the saturation indicator for

the metal grease filter no longer flashes.

The saturation indicator for the metal grease filter is reset.

2. Press and hold the - button until the saturation indicator for

the activated charcoal filter no longer flashes.

The saturation indicator for the activated charcoal filter is

reset.

Switching over the display for circulating-air mode

For circulating-air mode, the electronic control display must be

switched over accordingly:

1. Check that the extractor hood is connected and switched off.

2. Press and hold % and - at the same time until the symbol

™# appears for the starter set for circulating-air mode or the

symbol

’# appears for the CleanAir circulating-air module.

The electronic control is switched over to circulating-air

mode.

Switching over the display for exhaust air mode

1. Check that the extractor hood is connected and switched off.

2. Press and hold % and - at the same time until the symbol #

is displayed.

The electronic control is switched back to exhaust-air mode.

Audible signal

Switching on the audible signal

When the fan is switched off, press and hold the

% and +

buttons at the same time for approx. 3 seconds. An audible

signal sounds. The audible signal is switched on.

Switching off the audible signal

When the fan is switched off, press and hold the

% and +

buttons at the same time for approx. 3 seconds. An audible

signal sounds. The audible signal is switched off.

Explanation

Fan on/off

- Reduce the fan settings/fan run-on time

+ Increase the fan settings/intensive setting 1, 2

Light on/off/dimming

ERRVW

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch DWB128E51 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch DWB128E51

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info