Bedienungsanleitung Bosch DWB98JQ50 (Seite 11 von 20) (Englisch)

747000

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

en Cleaning and maintenance

Lighting

The lighting can be switched on and off independently

of the fan.

Touch the

B symbol.

Setting the brightness

Press and hold the B symbol until the required

brightness is reached.

Saturation display

If the metal grease filters or the activated charcoal filter

are/is saturated, the corresponding symbols flashes

after the appliance is switched off:

■ Metal grease filters: E

■ Activated charcoal filter: F

■ Metal grease filters and activated charcoal filter: E

and F

If you have not yet done so, the metal grease filters

should now be cleaned or the activated charcoal filter

replaced. ~ "Cleaning and maintenance" on page 10

Note: The saturation indicator does not apply for non-

renewable activated charcoal filters that are inserted

downstream of the metal grease filter. These activated

charcoal filters must be replaced twice a year.

The saturation indicators can be reset while they are

flashing. To do this, touch the appropriate symbol.

Switching over the display for air recirculation mode

For air recirculation mode, the electronic controller must

be switched over accordingly:

■ The extractor hood must be connected and switched

off.

■ Touch and hold the D symbol. Touch the "2"

symbol.Take your finger off the D symbol. This

will switch the electronic controller over to air

recirculation mode (filters that cannot be

regenerated).

■ Touch and hold the D symbol. Touch the "3"

symbol.Take your finger off the D symbol. This

will switch the electronic controller over to air

recirculation mode (filters that can be regenerated).

■ Repeatedly touching and holding the D symbol

and touching the "1" symbol switches the electronic

controller back over to air extraction mode.

Audible signal

Switching on

Touch and hold the # and y symbols at the same

time for approximately 3 seconds when the fan is

switched off. An audible signal will sound as an

acknowledgement.

Switching off

Touch and hold the # and y symbols at the same

time for approximately 3 seconds when the fan is

switched off. An audible signal will sound as an

acknowledgement.

2Cleaning and maintenance

Cl eani ng and mai nt enanc e

:Warning – Risk of burns!

The appliance becomes hot during operation. Allow the

appliance to cool down before cleaning.

:Warning

Risk of electric shock!

■ Penetrating moisture may result in an electric shock.

Clean the appliance using a damp cloth only. Before

cleaning, pull out the mains plug or switch off the

circuit breaker in the fuse box.

Risk of electric shock!

■ Do not use any high-pressure cleaners or steam

cleaners, which can result in an electric shock.

:Warning – Risk of injury!

Components inside the appliance may have sharp

edges. Wear protective gloves.

Caution!

There is a risk of surface damage if you do not peel off

the protective film.Remove the protective film from all

parts of the appliance before using the appliance for the

first time.

Cleaning agents

To ensure that the different surfaces are not damaged

by using the wrong cleaning product, follow the

instructions in the table. Do not use any of the following:

■ Harsh or abrasive cleaning agents, e.g. scouring

powder or liquid scouring cleaner,

■ Cleaning products with a high alcohol content,

■ Hard scouring pads or cleaning sponges,

■ Pressure washers or steam cleaners,

■ Cleaning products that dissolve limescale,

■ Aggressive all-purpose cleaning products,

■ Oven spray.

Note: Wash new sponge cloths thoroughly before use.

Note: Follow all instructions and warnings included with

the cleaning products.

Cleaning and maintenance en

--------

Removing metal grease filter

1. Open the lock and swing down the metal grease

filter. When you do this, take hold of the metal

grease filter from underneath with your other hand.

2. Take the metal grease filter out of the holder.

Notes

– Fat may accumulate in the bottom of the metal

grease filter.

– Hold the metal grease filter level to prevent fat

from dripping out.

Cleaning the metal mesh grease filters

These instructions apply to several appliance variants. It

is possible that individual features are described which

do not apply to your appliance.

:Warning – Risk of fire!

Fatty deposits in the grease filter may catch fire.

Regularly clean the grease filter. Never operate the

appliance without a grease filter.

Notes

■ Do not use aggressive, acidic or alkaline cleaning

products.

■ We recommend cleaning the grease filters every 2

months.

■ When cleaning the metal grease filters, also clean

the metal grease filter holder in the appliance using

a damp cloth.

■ The metal grease filters can be cleaned in the

dishwasher or by hand.

By hand:

Note: You can use a special degreaser to remove

stubborn dirt. This can be ordered from the online shop.

■ Soak the metal grease filters in hot soapy water.

■ Clean the filters with a brush and then rinse them

thoroughly.

■ Leave the metal grease filters to drain on an

absorbent material.

In the dishwasher:

Note: Slight discolouration may occur if the metal

grease filters are cleaned in the dishwasher. This

discolouration has no effect on the performance of the

metal grease filters.

■ Use normal domestic dishwashing detergents.

■ Do not clean heavily soiled metal grease filters

together with cookware.

■ Place the metal grease filters in the dishwasher,

leaving plenty of space around them. Do not trap the

metal grease filters.

■ Select a temperature of no more than 70 °C.

Area Cleaning products

Stainless steel Hot soapy water:

Clean with a dish cloth and then dry with a

soft cloth.

Clean stainless steel surfaces in the direction

of the grain only.

Special stainless steel cleaning products are

available from our after-sales service or from

specialist retailers.Apply a very thin layer of

the cleaning product with a soft cloth.

Painted surfaces Hot soapy water:

Clean using a damp dish cloth and then dry

with a soft cloth.

Do not use stainless steel cleaner.

Aluminium and plastic Hot soapy water:

Clean with a soft cloth.

Glass Glass cleaner:

Clean with a soft cloth. Do not use a glass

scraper.

Controls Hot soapy water:

Clean using a damp dish cloth and then dry

with a soft cloth.

Risk of electric shock caused by penetrating

moisture.

Risk of damage to the electronics caused by

penetrating moisture. Never clean controls

with a wet cloth.

Do not use stainless steel cleaner.

Bosch DWB98JQ50 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch DWB98JQ50

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info