Bedienungsanleitung Bosch DWK068G60 (Seite 9 von 12) (Englisch)

611647

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

3. Remove the metal grease filters on the underside of the

appliance.

4. Clean the metal grease filter.

5. After removing the filters, clean the inside of the appliance.

6. Clean the filter cover.

Cleaning the metal mesh grease filters

These instructions apply to several appliance variants. It is

possible that individual features are described which do not

apply to your appliance.

: Risk of fire!

Grease deposits in the grease filter may catch fire.

Clean the grease filter at least every 2 months.

Never operate the appliance without the grease filter.

Notes

■ Do not use any aggressive, acidic or alkaline cleaning

agents.

■ When cleaning the metal mesh grease filters, also clean the

holder for the metal mesh grease filters in the appliance

using a damp cloth.

■ The metal mesh grease filters can be cleaned in the

dishwasher or by hand.

By hand:

Note: You can use a special grease solvent for stubborn dirt. It

can be ordered via the Online Shop.

■ Soak the metal mesh grease filters in a hot soapy solution.

■ Clean the filters with a brush and then rinse them thoroughly.

■ Leave the metal mesh grease filters to drain.

In the dishwasher:

Note: If the metal mesh grease filters are cleaned in the

dishwasher, slight discolouration may occur. This has no effect

on the function of the metal mesh grease filters.

■ Do not clean heavily soiled metal mesh grease filters together

with utensils.

■ Place the metal mesh grease filters loosely in the dishwasher.

The metal mesh grease filters must not be wedged in.

Installing the metal mesh grease filter

1. Insert the 2 metal grease filters under the filter cover with the

lock facing downwards.

Fold the lock downwards, fold the metal grease filters

inwards and engage the lock.

2. Insert the metal grease filters on the underside of the

appliance.

3. Close the filter cover.

4. Press and hold the H button for 2 seconds.

The saturation indicator is reset.

Changing the activated charcoal filter (only in

circulating-air mode)

In order to guarantee efficient odour filtration, the filter must be

serviced regularly.

The activated charcoal filters must be replaced at least every

4 months.

Notes

■ The activated charcoal filters are not included in the delivery.

The activated charcoal filters can be obtained from specialist

retailers, from our after-sales service or from the Online Shop.

■ The activated charcoal filters cannot be cleaned or

reactivated.

1. Remove the metal grease filters.

2. Turn the old activated charcoal filters and pull away from the

holder.

3. Push the new activated charcoal filters onto the holder and

turn.

4. Install the metal grease filters.

5. Reset the saturation indicator; see section Saturation

indicator.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch DWK068G60 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch DWK068G60

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info