Bedienungsanleitung Bosch DWK87CM20 (Seite 9 von 20) (Englisch)

746537

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

en Trouble shooting

Installing the metal mesh grease filter

:Warning – Risk of injury!

Components inside the appliance may have sharp

edges. Wear protective gloves.

Note: Clean all accessible parts of the housing.

1. Insert the metal grease filter and lock it in place.

When you do this, take hold of the metal grease filter

from underneath with your other hand.

Note: Make sure that the metal grease filter is

positioned correctly.

2. If the metal grease filter has not been inserted

correctly, open the lock and reinsert the metal

grease filter correctly.

3Trouble shooting

Tr oubl e s hoot i ng

Malfunctions often have simple explanations. Please

read the following notes before calling the after-sales

service.

:Warning – Risk of electric shock!

Incorrect repairs are dangerous. Repairs may only be

carried out and damaged power cables replaced by

one of our trained after-sales technicians. If the

appliance is defective, unplug the appliance from the

mains or switch off the circuit breaker in the fuse box.

Contact the after-sales service.

Malfunction table

--------

LED lights

Defective LED lights may be replaced by the

manufacturer, their customer service or a qualified

technician (electrician) only.

:Warning – Risk of injury!

The light emitted by LED lights is very dazzling, and can

damage the eyes (risk group 1). Do not look directly

into the switched on LED lights for longer than

100seconds.

Problem Possible cause Solution

The appliance

does not work

The plug is not

plugged in.

Connect the appliance to the

electricity supply

Power cut Check whether other kitchen

appliances are working

Faulty fuse Check in the fuse box to make

sure that the fuse for the

appliance is OK

The lighting does

not work.

The LED lights

are defective.

Call the after-sales service.

The button illumi-

nation does not

work.

The control unit is

faulty.

Call the aftersales service.

Customer service en

4Customer service

Cus t omer ser vi ce

When calling us, please quote the product number (E

no.) and the production number (FD no.) so that we can

provide you with the correct advice. These numbers can

be found on the rating plate on the top of the appliance.

You can make a note of the numbers of your appliance

and the telephone number of the after-sales service in

the space below to save time should it be required.

Please be aware that a visit by an after-sales engineer

will be charged if a problem turns out to be the result of

operator error, even during the warranty period.

Please find the contact data of all countries in the

enclosed customer service list.

To book an engineer visit and product advice

Rely on the professionalism of the manufacturer. You

can therefore be sure that the repair is carried out by

trained service technicians who carry original spare

parts for your appliances.

Accessories

(not included in the scope of delivery)

Note: These instructions apply to several appliance

models. It may be the case that an optional accessory

that is listed does not apply for your appliance.

Note: Observe the installation instructions in the

accessory.

--------

E no. FD no.

After-sales serviceO

GB 03448928979

Calls charged at local or mobile rate.

IE 014502655

0.03 € per minute at peak. Off peak 0.0088 €

per minute.

=1U)'(1U

7\SH

Accessories Order number

Starter set for air recirculation mode (flat hood

with chimney)

Easy-change filter for starter set

DWZ0AF0U0

DWZ0AF0A0

Starter set for air recirculation mode (flat hood

without chimney)

Easy-change filter for starter set

DWZ0AF0T0

DWZ0AF0A0

Starter set for air recirculation mode (angled hood

with chimney)

Easy-change filter for starter set

DWZ0AK0U0

DWZ0AK0A0

Starter set for air recirculation mode (angled hood

without chimney)

Easy-change filter for starter set

DWZ0AK0T0

DWZ0AK0A0

Starter set for air recirculation mode with filter

that can be regenerated (flat hood with chimney)

DWZ0AF0S0

Starter set for air recirculation mode with filter

that can be regenerated (flat hood without chim-

ney)

DWZ0AF0R0

Starter set for air recirculation mode with filter

that can be regenerated (angled hood with chim-

ney)

DWZ0AK0S0

Starter set for air recirculation mode with filter

that can be regenerated (angled hood without

chimney)

DWZ0AK0R0

CleanAir air recirculation module

Easy-change filter for CleanAir air recirculation

module (cannot be regenerated)

DWZ1AX5C6

DZZ1XX1B6

Easy-change filter for CleanAir air recirculation

module (can be regenerated)

DZZ0XX0P0

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch DWK87CM20 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch DWK87CM20

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info