Bedienungsanleitung Bosch DWK97JQ60B (Seite 11 von 20) (Englisch)

746911

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

en Cleaning and maintenance

--------

Removing metal grease filter

1. Open the glass front slowly and fully. Hold the glass

front in the centre when doing so, gripping it firmly.

2. Open the lock and swing down the metal grease

filter. When you do this, take hold of the metal

grease filter from underneath with your other hand.

3. Take the metal grease filter out of the holder.

Notes

– Fat may accumulate in the bottom of the metal

grease filter.

– Hold the metal grease filter level to prevent

grease from dripping out.

Cleaning the metal mesh grease filters

These instructions apply to several appliance variants. It

is possible that individual features are described which

do not apply to your appliance.

:Warning

Risk of fire!

Fatty deposits in the grease filter may catch fire.

Regularly clean the grease filter. Never operate the

appliance without a grease filter.

Notes

■ Do not use aggressive, acidic or alkaline cleaning

products.

■ We recommend cleaning the grease filters every 2

months.

■ When cleaning the metal grease filters, also clean

the metal grease filter holder in the appliance using

a damp cloth.

■ The metal grease filters can be cleaned in the

dishwasher or by hand.

By hand:

Note: You can use a special degreaser to remove

stubborn dirt. This can be ordered from the online shop.

■ Soak the metal grease filters in hot soapy water.

■ Clean the filters with a brush and then rinse them

thoroughly.

■ Leave the metal grease filters to drain on an

absorbent material.

In the dishwasher:

Note: Slight discolouration may occur if the metal

grease filters are cleaned in the dishwasher. This

discolouration has no effect on the performance of the

metal grease filters.

■ Use normal domestic dishwashing detergents.

■ Do not clean heavily soiled metal grease filters

together with cookware.

■ Place the metal grease filters in the dishwasher,

leaving plenty of space around them. Do not trap the

metal grease filters.

■ Select a temperature of no more than 50 °C.

Area Cleaning products

Stainless steel Hot soapy water:

Clean with a dish cloth and then dry with a

soft cloth.

Clean stainless steel surfaces in the direction

of the grain only.

Special stainless steel cleaning products are

available from our after-sales service or from

specialist retailers.Apply a very thin layer of

the cleaning product with a soft cloth.

Painted surfaces Hot soapy water:

Clean using a damp dish cloth and then dry

with a soft cloth.

Do not use stainless steel cleaner.

Aluminium and plastic Hot soapy water:

Clean with a soft cloth.

Glass Glass cleaner:

Clean with a soft cloth. Do not use a glass

scraper.

Controls Hot soapy water:

Clean using a damp dish cloth and then dry

with a soft cloth.

Risk of electric shock caused by penetrating

moisture.

Risk of damage to the electronics caused by

penetrating moisture. Never clean controls

with a wet cloth.

Do not use stainless steel cleaner.

Trouble shooting en

Installing the metal mesh grease filter

:Warning

Risk of injury!

Components inside the appliance may have sharp

edges. Wear protective gloves.

Note: Clean all accessible parts of the housing.

1. Insert the metal grease filter and lock it in place.

When you do this, take hold of the metal grease filter

from underneath with your other hand.

Note: Make sure that the metal grease filter is

positioned correctly.

2. If the metal grease filter has not been inserted

correctly, open the lock and reinsert the metal

grease filter correctly.

3Trouble shooting

Tr oubl e s hoot i ng

Malfunctions often have simple explanations. Please

read the following notes before calling the after-sales

service.

:Warning

Risk of electric shock!

Incorrect repairs are dangerous. Repairs may only be

carried out and damaged power cables replaced by

one of our trained after-sales technicians. If the

appliance is defective, unplug the appliance from the

mains or switch off the circuit breaker in the fuse box.

Contact the after-sales service.

Malfunction table

--------

LED lights

Defective LED lights may be replaced by the

manufacturer, their customer service or a qualified

technician (electrician) only.

:Warning

Risk of injury!

The light emitted by LED lights is very dazzling, and can

damage the eyes (risk group 1). Do not look directly

into the switched on LED lights for longer than

100 seconds.

Problem Possible cause Solution

The appliance

does not work

The plug is not

plugged in.

Connect the appliance to the

electricity supply

Power cut Check whether other kitchen

appliances are working

Faulty fuse Check in the fuse box to make

sure that the fuse for the

appliance is OK

The lighting does

not work.

The LED lights

are defective.

Call the after-sales service.

The button illumi-

nation does not

work.

The control unit is

faulty.

Call the aftersales service.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch DWK97JQ60B Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch DWK97JQ60B

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info