Bedienungsanleitung Bosch DWP64CC20Z (Seite 7 von 12) (Englisch)

746941

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

en Operating modes

ÇOperating modes

Oper at i ng modes

Exhaust air mode

Note: The air must not be discharged into a flue that is

used for exhausting fumes from appliances burning gas

or other fuels (not applicable to appliances that only

discharge the air back into the room).

■ Before conveying the exhaust air into a non-

functioning smoke or exhaust gas flue, obtain the

consent of the heating engineer responsible.

■ If the exhaust air is conveyed through the outer wall,

a telescopic wall box should be used.

Air recirculation

Note: To bind odours in air recirculation mode, you

must install an activated carbon filter. The different

options for operating the appliance in air recirculation

mode can be found in the brochure. Alternatively, ask

your dealer. The required accessories are available

from specialist retailers, from customer service or from

the Online Shop.

1Operating the appliance

Oper at i ng t he appl i ance

Note: Switch on the extractor hood when you start

cooking and switch it off again several minutes after you

have finished cooking. This is the most effective way of

removing the kitchen fumes.

Control panel

Switching the appliance on and off

Switching on the appliance

Press the # button.

The extractor hood starts at fan setting 1.

Selecting the fan setting

Press the 2 or 3 button to set the corresponding fan

setting.

Switching off the appliance

Press the # button.

Lighting

The lighting can be switched on and off independently

of the ventilation system.

Press the = button.

The air which is drawn in is cleaned

by the grease filters and conveyed to

the exterior by a pipe system.

The air which is drawn in is cleaned by

the grease filters and an activated

carbon filter, and is conveyed back into

the kitchen.

Explanation

# Switches the fan on/off

2 Switches on fan setting 2

3 Switches on fan setting 3

= Switches the lighting on/off

Cleaning and maintenance en

2Cleaning and maintenance

Cl eani ng and mai nt enance

:Warning – Risk of burns!

The appliance becomes hot during operation. Allow the

appliance to cool down before cleaning.

:Warning – Risk of electric shock!

Penetrating moisture may result in an electric shock.

Clean the appliance using a damp cloth only. Before

cleaning, pull out the mains plug or switch off the circuit

breaker in the fuse box.

:Warning – Risk of electric shock!

Do not use any high-pressure cleaners or steam

cleaners, which can result in an electric shock.

Cleaning agents

To ensure that the different surfaces are not damaged

by using the wrong cleaning agent, observe the

information in the table. Do not use any of the following:

■ Harsh or abrasive cleaning agents,

■ Cleaning agents with a high alcohol content,

■ Hard scouring pads or cleaning sponges,

■ High-pressure cleaners or steam cleaners.

Wash new sponge cloths thoroughly before use.

Follow all instructions and warnings included with the

cleaning agents.

Removing and installing the filter

The filter must be serviced regularly in order to

guarantee efficient filtration of odours and grease.

Metal grease filter

The metal grease filters must be cleaned every 100

operating hours or at least every two months.

:Warning – Risk of fire!

Grease deposits in the grease filter may catch fire.

Clean the grease filter at least every 2 months.

Never operate the appliance without the grease filter.

Activated charcoal filter (only in circulating-air mode)

To ensure effective odour removal, the filters must be

serviced regularly.

The activated charcoal filters must be replaced at least

every 3 months.

Notes

■ The activated charcoal filters are not included with

the appliance. Activated charcoal filters are available

from specialist retailers, from our after-sales service

or from our online shop.

■ The activated charcoal filters cannot be cleaned or

reactivated.

Removing metal grease filter

The metal grease filters filter the grease out of kitchen

steam. To keep them in good working order, the filters

should be cleaned at least every two months.

1. Open the lock on the metal grease filters and

remove the filters from the retainer.

Notes

– When you do this, take hold of the metal grease

filters from underneath with your other hand.Make

sure that the metal grease filters do not fall and

damage the hob.

– Fat may accumulate in the bottom of the metal

grease filters. Hold the filters level to prevent fat

from dripping out.

2. Clean the metal grease filters.

3. Clean the inside of the appliance.

Area Cleaning agent

Stainless steel Hot soapy water:

Clean with a dish cloth and then dry with a

soft cloth.

Clean stainless steel surfaces in the grind

direction only.

Special stainless steel cleaning products are

available from our after-sales service or from

specialist retailers. Apply a very thin layer of

the cleaning product with a soft cloth.

Painted surfaces Hot soapy water:

Clean using a damp dish cloth and dry with a

soft cloth/towel.

Do not use any stainless steel cleaners.

Aluminium and plastic Glass cleaner:

Clean with a soft cloth.

Glass Glass cleaner:

Clean with a soft cloth. Do not use a glass

scraper.

Controls Hot soapy water:

Clean using a damp dish cloth and dry with a

soft cloth/towel.

Risk of electric shock caused by penetrating

moisture.

Risk of damage to the electronics from pene-

trating moisture. Never clean operating con-

trols with a wet cloth.

Do not use any stainless steel cleaners.

Bosch DWP64CC20Z Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info