Bedienungsanleitung Bosch Easy Vac 12 (Seite 12 von 109) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

765854

Zoom out

Zoom in

Vorherige Seite

1/109

Nächste Seite

12 | English

Cordless dry vacuum cleaner EasyVac 12

Recommended chargers AL11..

GAL 12..

GAL 12V-...

A) Limited performance at temperatures <0°C

Technical data determined using the battery that comes with the

product.

Assembly

Battery Charging

uUse only the chargers listed in the technical data. Only

these chargers are matched to the lithium-ion battery of

your power tool.

Note: The battery is supplied partially charged. To ensure

full battery capacity, fully charge the battery in the charger

before using your power tool for the first time.

The lithium-ion battery can be charged at any time without

reducing its service life. Interrupting the charging process

does not damage the battery.

The lithium-ion battery is protected against deep discharge

by the Electronic Cell Protection (ECP). A protective circuit

switches the cordless dust extractor off when the battery is

drained.

uDo not continue to press the on/off switch after the

tool has been automatically switched off. This can

damage the battery.

The battery must be removed from the vacuum cleaner to

charge it.

The battery features NTC temperature monitoring, which

only permits charging in a temperature range between 0 °C

and 45 °C. This achieves a long battery life.

A significantly reduced operating time after charging indic-

ates that the battery has deteriorated and must be replaced.

Follow the instructions on correct disposal.

Battery charge indicator

The three green LEDs of the battery charge indicator(3) in-

dicate the state of charge of the battery(4). The battery

charge indicator only illuminates for three seconds after

start-up.

LED Capacity

Continuous lighting 3 x green ≥ 2/3

Continuous lighting 2 x green ≥ 1/3

Continuous lighting 1 x green < 1/3

Flashing light 3 x green Reserve

If no LED lights up after switching on, the battery is defective

and must be replaced.

Inserting and removing the battery (seefiguresA1 – A2)

uDo not use force to insert the battery. The battery is de-

signed in such a way that it can only be inserted into the

vacuum cleaner when it is in the right position.

– Slide the battery(4) all the way into the battery bay(12).

– To remove the battery(4), press the release buttons(13)

on the battery and pull it out of the battery bay(12).

Fitting the vacuum cleaner accessories

(seefigureB)

uRemove the battery before cleaning or performing

maintenance on the dust extractor, making tool ad-

justments, changing accessories or placing the dust

extractor in storage. This safety measure prevents the

dust extractor from being started accidentally.

The vacuum cleaner accessories can be directly connected

with the dust container(6).

See the illustration for the different ways of combining the

vacuum cleaner accessories.

– Insert the individual vacuum cleaner accessories firmly

into the connection on the dust container(6) and into one

another.

Operation

uRemove the battery before cleaning or performing

maintenance on the dust extractor, making tool ad-

justments, changing accessories or placing the dust

extractor in storage. This safety measure prevents the

dust extractor from being started accidentally.

Starting Operation

uBefore extraction, ensure that the filter unit is se-

curely fitted.

uDo not use damaged filters (e.g. no cracks, small

holes, etc.). Replace any damaged filters immedi-

ately.

Switching on/off

– To switch on the vacuum cleaner, press the on/off but-

ton(2).

– To switch off the vacuum cleaner, press the on/off but-

ton(2) again.

Maintenance and Service

Maintenance and Cleaning

uTo ensure safe and efficient operation, always keep

the dust extractor and the ventilation slots clean.

– Clean the housing of the vacuum cleaner occasionally

with a damp cloth.

– Clean dirty charging pins using a dry cloth.

uRemove the battery before cleaning or performing

maintenance on the dust extractor, making tool ad-

justments, changing accessories or placing the dust

extractor in storage. This safety measure prevents the

dust extractor from being started accidentally.

1 609 92A 516 | (26.02.2019) Bosch Power Tools

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch Easy Vac 12 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info