Bedienungsanleitung Bosch EasyAquatak 100 (Seite 14 von 262) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

708245

Zoom out

Zoom in

Vorherige Seite

1/262

Nächste Seite

14 | English

F 016 L81 745 | (26.10.17) Bosch Power Tools

chine. Local regulations may restrict

the age of the operator.

Children should be supervised to en-

sure that they do not play with the

machine.

The unit must never be left unsuper-

vised while the unit is switched on.

The water jet from the high-pressure

nozzle produces a recoil on the gun.

You should therefore hold the gun

and spray lance firmly.

The product should not be held by the

operator whilst in operation and

should be kept in an upright position

as illustrated within this manual when

placed on the ground.

Transport

Switch off the motor and secure the

unit before transporting.

Maintenance

Switch off the unit prior to all cleaning

and maintenance work and before re-

placing components. Pull out the

mains plug if the unit is mains-operat-

ed.

Repairs may only be carried out by

authorised Bosch Service Centres.

Accessories and spare parts

Accessories and spare parts which

have been approved by Bosch must

be used. Original accessories and

spare parts guarantee that the unit

can be operated safety and without

any breakdowns.

Symbols

The following symbols are important for reading and under-

standing the operating instructions. Please take note of the

symbols and their meaning. The correct interpretation of the

symbols will help you to use the machine in a better and safer

manner.

Intended Use

The product is intended for cleaning areas and objects out-

side the house, tools, vehicles and boats, if the appropriate

accessories such as cleaning agents approved by Bosch are

used.

Intended use is related to operation within 0°C and 40°C am-

bient temperature.

This product should not be used for professional use.

The product should not be held by the operator whilst in oper-

ation and should be kept in an upright position as illustrated

within this manual when placed on the ground.

Technical Data

Symbol Meaning

Movement direction

Weight

Off

Accessories

Pressure washer EasyAquatak 100

Article number

3 600 HA7 E..

Rated power

kW 1.2

Supply temperature max.

°C 40

Supply rate min.

l/min 5.5

Allowable pressure

MPa 10

Rated pressure

MPa 6.7

Rated Flow

l/min 4.8

Maximum inlet pressure

MPa 1

Autostop function



Weight according to EPTA-

Procedure 01:2014

kg 3.7

Protection class

/II

Serial number

See serial number (rating plate)

on pressure washer.

The values given are valid for a nominal voltage [U] of 230 V. For differ-

ent voltages and models for specific countries, these values can vary.

Starting cycles generate brief voltage drops. Interference with other

equipment/machines may occur in case of unfavourable mains system

conditions. Malfunctions are not to be expected for system impedances

below 0.153 ohm.

OBJ_BUCH-3244-001.book Page 14 Thursday, October 26, 2017 10:08 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch EasyAquatak 100 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info