Bedienungsanleitung Bosch EasyControl Smart radiator thermostat (Seite 3 von 8) (Englisch)

809349

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

Product information

EasyControl – 6720881858 (2017/10)

CAUTION:

Damage due to incorrect connection.

The device may be damaged if this product is connected incorrectly.

▶ Only have the product installed by an authorised professional.

2 Product information

2.1 EU Declaration of Conformity

The design and operating characteristics of this product

comply with the european and national requirements. Its

conformity with harmonised European standards is declared

by the CE marking.

You can request the EU Declaration of Conformity for the product. See

the contact address on the back cover of these instructions.

2.2 Product Description

You can set the required temperature of a room easily and precisely (to

the nearest half degree) using the Control app. Thanks to the sensors

integrated in the thermostat, you can quickly set a temperature in each

room that is comfortable for you. A time-controlled temperature

program can also be set for every room. An automatic frost protection

program starts at temperatures below 4 °C. The smart radiator

thermostat also regularly opens the radiator valve to prevent

calcification.

2.3 Usage

The product is intended exclusively for installation on radiators

(including convectors and skirting heating) indoors. To ensure the

product works properly, it must be used together with the EasyControl.

▶ Make sure the product is adjusted correctly by following the safety

instructions and other directions in these operating instructions and

in the EasyControl app.

▶ The technical data must be taken into account.

▶ Avoid installation in areas exposed to intense sunlight or in dust-

laden environments.

▶ Do not make any modifications to the product.

2.4 Product overview

Fig. 1

Table 2

2.5 Specifications

Table 3

2.6 Wireless connection faults

Faults in the wireless connection (due to electric motors or faulty

electrical appliances, for example) cannot be entirely ruled out. The

transmission range indoors may deviate significantly from the

transmission range outdoors. In addition to the transmitter power and

receiver properties, environmental effects such as moisture and

structural aspects can impair the performance of the wireless

connection.

Articles Explanation

1. Mode key “0” Operation mode setting

2. Minus key “-” Reduction of set temperature

3. LED display Display of operation and fault displays

4. Plus key “+” Increase setting temperature

5. Display Display of settings, values, processes, operating

and fault displays

10016436-001

Model of MS Thermostat AA

Batteries 2 x LR6/AA

Battery service life ≥ 2 years

Power consumption ≤120mA

Receive category SRD category 2

Transmit frequency 868.3 MHz, 869,525 MHz

Transmit strength ≤ 10 mW

Wireless range (outdoors) ≤100m

Duty cycle @ 868.3 MHz < 1% per hour

@ 869,525 MHz < 10% per hour

Radiator valve connection M30 x 1.5 mm

Protection IP20

Mode of operation Type 1

Pollution degree 2

Environment temperature 0 °C to 50 °C

Humidity 5% to 80%

Dimensions

(width x height x depth)

48 mm x 57 mm x 103 mm

Weight (excluding batteries) 140 g

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch EasyControl Smart radiator thermostat Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch EasyControl Smart radiator thermostat

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info