Bedienungsanleitung Bosch EasyHedgeCut 12-450 (Seite 17 von 282) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

707792

Zoom out

Zoom in

Vorherige Seite

1/282

Nächste Seite

English | 17

Bosch Power Tools F 016 L81 736 | (23.5.17)

The declared vibration emission level represents the main ap-

plications of the tool. However if the tool is used for different

applications, with different accessories or insertion tools or is

poorly maintained, the vibration emission may differ. This

may significantly increase the exposure level over the total

working period.

An estimation of the level of exposure to vibration should also

take into account the times when the tool is switched off or

when it is running but not actually doing the job. This may sig-

nificantly reduce the exposure level over the total working

period.

Identify additional safety measures to protect the operator

from the effects of vibration such as: maintain the tool and the

accessories, keep the hands warm, organisation of work pat-

terns.

Mounting and Operation

Starting

Battery Charging

 Do not use other battery chargers. The supplied battery

charger is designed for the Lithium-Ion battery in your gar-

den product.

 Observe the mains voltage! The voltage of the power

supply must correspond with the data given on the name-

plate of the battery charger. Battery chargers marked with

230 V can also be operated with 220 V.

The battery is equipped with temperature monitoring that al-

lows charging only in the temperature range between 0 °C

and 45 °C. In this manner, a high battery service life is

achieved.

Note: The battery supplied is partially charged. To ensure full

capacity of the battery, completely charge the battery in the

battery charger before using your power tool for the first time.

The lithium-ion battery can be charged at any time without re-

ducing its service life. Interrupting the charging procedure

does not damage the battery.

The “Electronic Cell Protection (ECP)” protects the lithium-

ion battery against deep discharging. When the battery is run

down or discharged, the garden product is shut off by means

of a protective circuit: The blade no longer moves.

Do not continue to press the On/Off

switch after the garden product has

been automatically switched off. The battery can be dam-

aged.

Charging Procedure

The charging procedure starts as soon as the mains plug is

plugged into the socket and the battery is then inserted into

the battery charger.

Due to the intelligent charging method, the charging condi-

tion of the battery is automatically detected and the battery is

charged with the optimum charging current, depending on

battery temperature and voltage.

This gives longer life to the battery and always leaves it fully

charged when kept in the charger for storage.

Note: The charging procedure is only possible when the bat-

tery temperature is within the allowable charging tempera-

ture range, see section “Technical Data”.

AL 1130 CV

Flashing Green Battery Charge Indicator

The rapid-charging procedure is signalled

by a flashing green battery charge indica-

tor.

Note: The rapid-charging procedure is only possible when the

battery temperature is within the allowable charging temper-

ature range, see section “Technical Data”.

Continuous Lighting of the Green Battery Charge

Indicator

Continuous lighting of the green battery

charge indicator indicates that the battery

is fully charged.

Afterwards, the battery can be removed for immediate use.

When the battery is not inserted, continuous lighting of the

battery charge indicator indicates that the mains plug is in-

serted in the socket and that the battery charger is ready for

operation.

Continuous Lighting of the Red Battery Charge

Indicator

Continuous lighting of the red battery

charge indicator indicates that the temper-

ature of the battery is not within the allowa-

ble charging temperature range, see sec-

tion “Technical Data”. As soon as the allowable charging

temperature range is reached, the battery charger automati-

cally switches to rapid charging.

Flashing Red Battery Charge Indicator

A flashing red battery charge indicator in-

dicates a different malfunction of the charg-

ing procedure, see section “Troubleshoot-

ing”.

Action Figure Page

Delivery Scope

1 257

Inserting the Battery

2 257

Starting

3 257

Stopping

4 258

Working Advice

5 258

Blade Maintenance

6 259

Storage and Transport

6 259

Selecting Accessories

7 259

OBJ_BUCH-1685-008.book Page 17 Tuesday, May 23, 2017 2:11 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch EasyHedgeCut 12-450 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info