Bedienungsanleitung Bosch EasyHedgeCut 55 (Seite 11 von 192) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch)

777043

Zoom out

Zoom in

Vorherige Seite

1/192

Nächste Seite

English | 11

uTo safeguard against contact with the moving cutter

blade, this hedge trimmer is constructed with two

handles each with a blade control (switch). To operate

the hedge trimmer, both controls must be actuated simul-

taneously. Do not use the tool, if it runs without a

switch being actuated or just one switch being actu-

ated.

Electrical Safety

Warning: Switch off, remove plug from

mains before adjusting, cleaning or if cable

is cut, damaged or entangled.

Your machine is double insulated for safety and requires no

earth connection. The operating voltage is 230VAC, 50Hz

(for non-EU countries 220V, 240V 50Hz) Contact your

Bosch Service Centre for details. If in doubt contact a quali-

fied electrician or the nearest Bosch Service Centre.

For increased electrical safety use a Residual Current Device

(RCD) with a tripping current of not more than 30mA. Al-

ways check your RCD every time you use it.

Keep the supply cables away from moving hazardous parts

and avoid damage to the cables; this can lead to contact with

live parts.

The connections (plugs and sockets) should be kept dry and

off the ground.

The supply cables must be inspected for signs of damage at

regular intervals and may only be used if in perfect condi-

tion.

If the supply cable on the product is damaged, it must only

be replaced by a Bosch Service Centre. Only use approved

extension cables.

Use only extension cords, cables, leads, cable reels that

comply with EN 61242/IEC 61242 or IEC 60884-2-7.

If you want to use an extension cable when operating your

product, only the following cable dimensions should be

used:

– Nominal conductor area of 1.25mm2 or 1.5mm2

– Maximum length 30m for a Cord Extension Set or max-

imum length of 60m for a Cable Reel with Residual Cur-

rent Device (RCD).

Note: If an extension cable is used it must be earthed and

connected through the plug to the earth cable of your supply

network in accordance with prescribed safety regulations.

WARNING! Inadequate extension cables can

be dangerous. Extension cable, plug and

socket must be of watertight construction

and intended for outdoor use.

Products sold in GB only:

Your product is fitted with an BS 1363/A approved electric

plug with internal fuse (ASTA approved to BS 1362).

If the plug is not suitable for your socket outlets, it should be

cut off and an appropriate plug fitted in its place by an au-

thorised customer service agent. The replacement plug

should have the same fuse rating as the original plug.

The severed plug must be disposed of to avoid a possible

shock hazard and should never be inserted into a mains

socket elsewhere.

uProducts that are only sold in AUS and NZ: Use a resid-

ual current device (RCD) with a nominal residual current

of 30 mA or less.

Symbols

The following symbols are important for reading and under-

standing the original instructions. Please take note of the

symbols and their meaning. The correct interpretation of the

symbols will help you to use the product in a better and safer

manner.

Symbol Meaning

Wear protective gloves

Wear safety glasses/goggles

Movement direction

Reaction direction

Weight

Switching On

Switching Off

CLICK!

Audible noise

Prohibited action

Accessories/Spare Parts

Product Description and

Specifications

Read all safety warnings and all instruc-

tions. Failure to follow the safety warnings and

instructions may result in electric shock, fire

and/or serious injury.

Please observe the illustrations at the ending of this operat-

ing manual.

Intended Use

The machine is intended for cutting and trimming hedges

and bushes in domestic use.

Product features (see figures A and B)

The numbering of the product features refers to the illustra-

tion of the product on the graphics pages.

Bosch Power Tools F 016 L94 104 | (28.09.2020)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch EasyHedgeCut 55 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info