Bedienungsanleitung Bosch EasyImpact 550 plus Drill Assistant (Seite 20 von 111) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

708036

Zoom out

Zoom in

Vorherige Seite

1/111

Nächste Seite

20 | English

1 609 92A 29Y | (5.8.16) Bosch Power Tools

Screwdriver Tools

When working with screwdriver bits 25, a universal bit holder

24 should always be used. Use only screwdriver bits that fit

the screw head.

For driving screws, always position the “Drilling/Impact Drill-

ing” selector switch 4 to the “Drilling” symbol.

Replacing the Drill Chuck

 For power tools without spindle lock, the drill chuck

must be replaced by an authorised after-sales service

agent for Bosch power tools.

The drill chuck must be tightened with a tightening

torque of approx. 30–35 Nm.

Operation

Starting Operation

 Observe correct mains voltage! The voltage of the pow-

er source must agree with the voltage specified on the

nameplate of the machine. Power tools marked with

230 V can also be operated with 220 V.

Reversing the rotational direction (see figure K)

The rotational direction switch 5 is used to reverse the rota-

tional direction of the machine. However, this is not possible

with the On/Off switch 7 actuated.

Right Rotation: For drilling and driving in screws, push the

rotational direction switch 5 left to the stop.

Left Rotation: For loosening and unscrewing screws and

nuts, press the rotational direction switch 5 through to the

right stop.

Setting the operating mode

Drilling and Screwdriving

Set the selector switch 4 to the “Drilling” symbol.

Impact drilling

Set the selector switch 4 to the “Impact drilling”

symbol.

The selector switch 4 engages noticeably and can also be ac-

tuated with the machine running.

Switching On and Off

To start the machine, press the On/Off switch 7 and keep it

pressed.

To lock the pressed On/Off switch 7, press the lock-on button

To switch off the machine, release the On/Off switch 7 or

when it is locked with the lock-on button 6, briefly press the

On/Off switch 7 and then release it.

To save energy, only switch the power tool on when using it.

Adjusting the Speed/Impact Rate

The speed/impact rate of the switched on power tool can be

variably adjusted, depending on how far the On/Off switch 7

is pressed.

Light pressure on the On/Off switch 7 results in low speed/

impact rate. Further pressure on the switch increases the

speed/impact rate.

Working Advice

 Before any work on the machine itself, pull the mains

plug.

 Apply the power tool to the screw/nut only when it is

switched off. Rotating tool inserts can slip off.

After longer periods of working at low speed, allow the ma-

chine to cool down by running it for approx. 3 minutes at max-

imum speed with no load.

Removing the Dust Collection Device (see figures L–M)

It is a good idea to remove the dust collection device 13:

– in order to use the rail of the Drill Assistant 10 as a depth

stop

– when using large application tools.

Maintenance and Service

Maintenance and Cleaning

 Before any work on the machine itself, pull the mains

plug.

 For safe and proper working, always keep the machine

and ventilation slots clean.

If the replacement of the supply cord is necessary, this has to

be done by Bosch or an authorized Bosch service agent in or-

der to avoid a safety hazard.

After-sales Service and Application Service

Our after-sales service responds to your questions concern-

ing maintenance and repair of your product as well as spare

parts. Exploded views and information on spare parts can al-

so be found under:

www.bosch-pt.com

Bosch’s application service team will gladly answer questions

concerning our products and their accessories.

In all correspondence and spare parts orders, please always

include the 10-digit article number given on the nameplate of

the product.

Great Britain

Robert Bosch Ltd. (B.S.C.)

P.O. Box 98

Broadwater Park

North Orbital Road

Denham

Uxbridge

UB 9 5HJ

At www.bosch-pt.co.uk you can order spare parts or arrange

the collection of a product in need of servicing or repair.

Tel. Service: (0344) 7360109

E-Mail: boschservicecentre@bosch.com

OBJ_BUCH-2824-001.book Page 20 Friday, August 5, 2016 1:28 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch EasyImpact 550 plus Drill Assistant Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info