Bedienungsanleitung Bosch EasyImpact 5500 (Seite 18 von 111) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

708037

Zoom out

Zoom in

Vorherige Seite

1/111

Nächste Seite

18 | English

1 609 92A 29Y | (5.8.16) Bosch Power Tools

The vibration level given in this information sheet has been

measured in accordance with a standardised test given in

EN 60745 and may be used to compare one tool with anoth-

er. It may be used for a preliminary assessment of exposure.

The declared vibration emission level represents the main ap-

plications of the tool. However if the tool is used for different

applications, with different accessories or insertion tools or is

poorly maintained, the vibration emission may differ. This

may significantly increase the exposure level over the total

working period.

An estimation of the level of exposure to vibration should also

take into account the times when the tool is switched off or

when it is running but not actually doing the job. This may sig-

nificantly reduce the exposure level over the total working

period.

Identify additional safety measures to protect the operator

from the effects of vibration such as: maintain the tool and the

accessories, keep the hands warm, organisation of work pat-

terns.

Assembly

 Before any work on the machine itself, pull the mains

plug.

Auxiliary Handle (see figure A)

 Operate your machine only with the auxiliary handle 9.

 Before any work, make sure that the wing bolt 21/18 is

tightened. Loss of control can cause personal injury.

Turn the wing bolt 21/18 counterclockwise and guide the

auxiliary handle 9 over the drill chuck onto the spindle collar

of the power tool.

You can swivel the auxiliary handle 9 in order to achieve a safe

work posture that minimises your fatigue.

Swivel the auxiliary handle 9 to the required position and

retighten the wing bolt 21/18 in clockwise direction.

Adjusting the Drilling Depth (see figureB)

The required drilling depth X can be set with the depth stop

23.

Press the button for depth stop adjustment 22 and insert the

depth stop into the auxiliary handle 9.

The knurled surface of the depth stop 23 must face down-

ward.

Pull out the depth stop until the distance between the tip of

the drill bit and the tip of the depth stop corresponds with the

desired drilling depth X.

Drill Assistant

Attaching the Drill Assistant (see figures C–D)

The Drill Assistant 10 can be used with and without dust col-

lection device 13. Use of the dust collection device 13 is lim-

ited to drill bits with a diameter of 12 mm and a length of

120 mm.

Attach the dust collection device 13 to the mounting 26.

Press the unlocking button 8 to release the Drill Assistant 10

from its parked position.

Guide the Drill Assistant 10 over the drill chuck onto the spin-

dle collar of the power tool.

Lock it by turning the wing bolt 18 in clockwise direction.

Adjusting the Drilling Depth (see figures E – F)

Mount the drill bit (see section “Changing the Tool”).

You can use the setting ring 17 to set the required drilling

depth X.

Unlock the setting ring 17 by turning it to the left . Place

the dust box 11 or the mounting 26 flush against the wall or

workpiece. Move the tip of the drill bit to the wall or work-

piece.

EasyImpact

5500

EasyImpact

570

EasyImpact

5700

EasyImpact

6000

Typically the A-weighted noise levels of the

product are

Sound pressure level

Sound power level

Uncertainty K

Wear hearing protection!

dB(A)

107

108

Vibration total values a

(triax vector sum)

and uncertainty K determined according to

EN 60745-2-1:

Drilling in metal:

m/s

7.5

1.5

6.5

1.5

6.5

1.5

6.5

1.5

Impact drilling in concrete:

m/s

4.0

2.0

Screwdriving:

m/s

<2.5

1.5

<2.5

1.5

<2.5

1.5

<2.5

1.5

OBJ_BUCH-2824-001.book Page 18 Friday, August 5, 2016 1:28 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch EasyImpact 5500 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info