636459
54
Zoom out
Zoom in
Vorherige Seite
1/68
Nächste Seite
6 720 800 817 (2012/02)
54 | Troubleshooting
Fault 13
System configuration: BUS device changed
or replaced
Check system configuration for heating
circuit x and connections on IPM for heating
circuit x.
159
BUS subscriber changed or
replaced.
Check system configuration for
heating circuit x and IPM
connections for heating circuit x.
Fault 14
System configuration: incompatible BUS
device
DHW controlled by boiler. IPM control of
DHW has no effect.
117
Incompatible BUS subscriber: Identify incompatible BUS
subscriber and remove from
the system.
Fault 14
System configuration: incompatible BUS
device
IPM for cylinder must be set to identification
3 or higher.
118
119
Incompatible BUS subscriber: Set IPM for cylinder to code 3
or higher.
Fault 19
Unable to save parameter settings
202
BUS subscriber is configured
but not available at present.
Check system layout, check
system configuration, modify if
necessary and set parameter
again.
Fault 30
Mixer temperature sensor faulty
7
Mixer temperature sensor (MF)
connected to IPM faulty.
Check mixer temperature
sensor (MF) and replace if
necessary.
Fault 31
External CH flow temperature sensor faulty
6
Common temperature sensor
(VF) connected to the IPM
faulty.
Check common temperature
sensor (VF) and replace if
required.
Fault 32
Cylinder temperature sensor faulty
8
Cylinder temperature sensor
(SF) connected to the IPM
faulty.
Check cylinder temperature
sensor (SF) and replace if
required.
Fault 33
Temperature sensors incorrectly connected
20
Cylinder temperature sensor
(SF) and mixer temperature
sensor (MF) are connected to
the IPM.
Remove one of the
temperature sensors (SF or
MF).
21
Two common temperature
sensors (VF) are connected to
the IPM.
Remove one of the common
temperature sensors (VF).
22
A temperature sensor is
connected to the IUM.
Remove the temperature
sensor and insert a coding plug
if necessary.
Fault 34
Temperature sensors connected and mode
of operation do not match
23
Temperature sensors
connected to the IPM and the
associated operating mode do
not match.
Check temperature sensors
and associated operating mode
and adjust if necessary.
Information displayed (Æ Items 1, 3 and 4 in Fig. 16)
Text Code Cause Remedy (by contractor)
54

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Bosch FR120 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Bosch FR120

Bosch FR120 Bedienungsanleitung und Installationsanweisung - Deutsch - 68 seiten

Bosch FR120 Bedienungsanleitung - Deutsch - 40 seiten

Bosch FR120 Bedienungsanleitung - Englisch - 36 seiten

Bosch FR120 Bedienungsanleitung und Installationsanweisung - Holländisch - 72 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info