Bedienungsanleitung Bosch GAL 18V-160 C (Seite 12 von 162) (Alle Sprachen)

786205

Zoom out

Zoom in

Vorherige Seite

1/162

Nächste Seite

12 | English

ger and a mobile device by means of Bluetooth® wireless

technology.

In conjunction with the Bluetooth® Low Energy Module, the

following connectivity functions are available for the char-

ger:

– Registration and personalisation

– Status check, output of warning messages

– General information and settings

– Management

Read the corresponding operating instructions for informa-

tion about the Bluetooth® Low Energy Module.

Errors – causes and corrective measures

Cause Corrective measures

Red temperature monitoring/error indicator (5) is flash-

ing

Charging not possible

The battery is not connected

(correctly) Connect battery to charger

correctly

Battery contacts are dirty Clean battery contacts; e.g.

by connecting and discon-

necting the battery several

times. Replace battery if ne-

cessary

Battery defective Replace battery

Charger faulty Have charger checked if ne-

cessary by an authorised

after-sales service centre for

Bosch power tools

Green battery charge indicator (7) is not lighting up

Mains plug of the charger is

not (correctly) plugged in Insert the mains plug into the

mains socket (completely)

Socket outlet, mains cable or

charger defective Check mains voltage, have

charger checked if necessary

by an authorised after-sales

service centre for Bosch

power tools

Blue connection status indicator (4) is not lighting up

No Bluetooth® connection

Check whether the

Bluetooth® Low Energy Mod-

ule is correctly fitted and

locked in place.

Switch Bluetooth® off and on

again on your mobile device.

Check the application on

your mobile device.

Check whether Bluetooth® is

activated on your mobile

device.

Check whether your mobile

device has been overloaded.

Cause Corrective measures

Reduce the distance

between the charger and

your mobile device.

Where possible, ensure that

there are no obstructions

(e.g. reinforced concrete,

metal doors) between the

charger and your mobile

device. Keep the equipment

away from any sources of

electromagnetic interference

(e.g. WiFi transmitters).

Practical advice

uThe charger with built-in Bluetooth® Low Energy Mod-

ule is fitted with a wireless interface. Local operating

restrictions, e.g. in aircraft or hospitals, must be ob-

served.

When the charger is used continuously, or for several con-

secutive charge cycles without interruption, the charger may

heat up. This is, however, harmless and does not indicate

that the charger has a technical defect.

A significantly reduced operating time after charging indic-

ates that the battery has deteriorated and must be replaced.

Battery cooling (Active Air Cooling)

The fan control unit integrated into the charger monitors the

temperature of the inserted battery. As soon as the battery

temperature is above approx. 0 °C, the battery will be cooled

by a fan. The fan generates a ventilation sound when

switched on.

If the fan does not run, it is defective or the battery temper-

ature is < 0 °C. This can increase the charging time.

Charging process

Power Boost mode

The Power Boost function charges batteries up to approx.

50% battery capacity in rapid charging mode. This means

batteries are ready for use sooner than if charged using the

standard charging mode.

With Power Boost activated, the battery is initially charged

with a high charging current, which is then gradually re-

duced.

If the battery remains in the charger, it automatically keeps

charging in conservation mode up to approx. 80% battery

capacity.

Standard charging mode

The battery is charged up to approx. 100% battery capacity.

The standard charging mode provides the best combination

of fast charging time and full battery charge. The standard

charging mode optimises the service life of the battery.

Max life time mode

The battery is charged up to approx. 80% battery capacity.

This mode charges the battery more slowly, protecting the

battery and thereby significantly prolonging its service life.

1 609 92A 52F | (11.03.2019) Bosch Power Tools

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch GAL 18V-160 C Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info