Bedienungsanleitung Bosch GardenPump 18V 2000 (Seite 15 von 256) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch)

776843

Zoom out

Zoom in

Vorherige Seite

1/256

Nächste Seite

English | 15

Measure the height H and the diameter D of the water tank

as well as the distance E from the rim of the tank to the bat-

tery control box.

The length L1 of the cable calculates as follows:

H + D + E – 250mm

The length L2 of the connecting hose calculates as follows:

H – 130mm

Wrapping the cable and cutting the connecting

hose (see figureE)

Wrap the excess cable around the pump(18) and secure us-

ing the provided cable clamp(16).

Release the anti-siphon connector(12) with hose attached

from the clamp on the hose guide(11).

Cut the connecting hose to length L2 and re-attach the anti-

siphon connector(12) on the remaining connecting hose.

Return the anti-siphon connector(12) with hose into the

clamp on the hose guide(11).

You can leave the connecting hose uncut and let the hose

protrude. Please note that for the anti-siphon connector to

function the anti-siphon connector needs to be placed in its

original position in the hose guide.

Connecting the hose and cable (see figureF)

Take the 2-pin plug connector(21) on the power cable and

align it with the junction point on the battery control unit and

insert until it is firmly seated.

Screw the union nut onto the cable connection to secure the

plug and prevent water from entering.

Attach the universal connector(14) on the connecting

hose(13) to the hose connection(19) on the pump.

Placing the pump into the tank and connecting a

garden hose (see figureG)

With the connecting hose attached lower the pump into the

tank.

To aid submersion the pump is fitted with a small vent that

allows air to escape when the pump is placed into water. A

valve closes the vent when the pump is operating which ac-

counts for the noise users may notice if the pump is shaken.

Place the hose guide on the rim of the water tank and ensure

that the pump is in the correct position. If necessary adjust

accordingly.

Attach a garden hose with a standard hose coupling to the

anti-siphon connector(12).

Note: Do not use a hose coupling with auto stop as this may

reduce the flow.

Using closed Rainwater Tanks

The pump can also be used with closed water tanks. De-

pending on the version, use the access points for cable and

hose at the top of the tank. In some cases the openings must

be cut out. Make sure there are no sharp edges/burrs.

Inserting the Battery (seefigureH)

To open the control unit(6), pivot the locking handle (7) up-

ward and pull the control unit cover down. Insert the

battery(22) from above into the control unit until it engages.

Close the cover and pivot the locking handle downward. The

pump can only be started if the control unit is locked with the

locking handle.

Finished assembly (see figureI)

Make sure that the water tank is always closed with a lid or

the like, to ensure that no children or animals can fall into it.

Operation

If no more water can be pumped, a dry-run protection fea-

ture switches off the pump automatically.

Switching On and Off (see figure J)

To switch on the pump, press the On/Off switch(1). The

battery charge indicator lights up.

The battery charge-control indicator(2) indicates the charge

condition of the battery:

LED Charge Condition

Continuous light, green > 50%

Continuous light, yellow 50 % − 20%

Continuous light, red < 20%

Flashing, red Discharged, remove

and recharge battery

Note: An illuminated warning triangle indicates a malfunc-

tion in the device, see section “Troubleshooting - Causes and

Corrective Measures”.

To switch off the pump, press the On/Off switch(1) again.

Timer function (see figureK)

To activate the time function, press the time function button

(5) when the pump is switched on.

After pressing once, the running time is 5 min. With each fur-

ther press, the running time of the pump increases by 5 min,

up to 15 min.

The selected running time is indicated by the corresponding

LED(4).

After the preset time has elapsed, the pump switches off

automatically.

To switch off the time function, press the time function

button(5) until the indication (4) goes out.

Removing the Battery (see figureL)

To open the control unit(6), pivot the locking handle (7) up-

ward and fold the control unit cover down. Press the release

button and pull the battery(22) upwards out of the control

unit. Do not use force to do this.

Close the cover to prevent moisture from entering.

Bosch Power Tools F 016 L94 292 | (23.07.2021)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch GardenPump 18V 2000 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch GardenPump 18V 2000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info