Bedienungsanleitung Bosch GAS 18V-1 (Seite 14 von 140) (Alle Sprachen)

786181

Zoom out

Zoom in

Vorherige Seite

1/140

Nächste Seite

14 | English

Switching on/off

– To switch on the vacuum cleaner, press the on/off

button(3).

– To switch off the vacuum cleaner, press the on/off

button(3) again.

Maintenance and Service

Maintenance and Cleaning

uRemove the battery before cleaning or performing

maintenance on the dust extractor, making tool ad-

justments, changing accessories or placing the dust

extractor in storage. This safety measure prevents the

dust extractor from being started accidentally.

uTo ensure safe and efficient operation, always keep

the dust extractor and the ventilation slots clean.

Clean the housing of the dust extractor occasionally with a

damp cloth.

Clean dirty charging pins using a dry cloth.

Emptying the Dust Container (seefigureC)

Clean the dust container (6) after each use in order to en-

sure that the vacuum cleaner continues to perform optim-

ally.

– Hold the dust extractor over a suitable waste bin.

– Press the release button(7) to open the emptying

flap(8).

– Shake out the dust container(6).

– Close the emptying flap(8) in such a way that you can

hear it click into place.

– If necessary, empty the coarse dirt filter(1) and clean the

rotational airflow unit(17) as well as the filter(16).

Emptying the Coarse Dirt Filter (seefiguresD1–D2)

– Turn the coarse dirt filter(1) as far as it will go in the dir-

ection and remove it from the dust container(6).

– Shake out the coarse dirt filter and the dust container

over a suitable waste bin.

– Place the coarse dirt filter(1) in the dust container(6)

and turn it as far as it will go in the direction .

Cleaning the Rotational Airflow Unit and Filter

(seefiguresE1–F2)

– Hold the dust extractor down slightly as shown so that

dust cannot fall out of the dust container when the dust

extractor is opened.

– Press the release button(2) and remove the dust

container(6) from the motor housing(5) (see figureE1).

– Hold onto the filter grips(15) and pull the rotational air-

flow unit(17) with the filter(16) out of the dust

container(6) (see figureE2).

– Shake out the dust container(6) and the rotational air-

flow unit(17) over a suitable waste bin (see figureE3).

– Put the rotational airflow unit(17) and filter back in the

dust container(6).

– Push the locking tab(18) up and remove the filter(16)

(see figuresF1–F2).

– Gently tap the filter against a solid surface to loosen the

dust. Replace any damaged filters.

– Insert the cleaned filter(16) into the rotational airflow

unit(17).

– Attach the dust container(6) at the bottom in the motor

housing(5). Apply slight pressure to the dust container to

allow it to click into place in the motor housing.

Storage (see figure G)

You can use the wall bracket(19) (accessory) to save space

when storing the dust extractor and extractor accessories.

Faults

Regularly empty the dust container(6) and coarse dirt

filter(1) and regularly clean the rotational airflow unit(17)

and filter(16) for optimum suction power.

If the suction power is insufficient, check:

– Is the dust container (6) full?

▷Empty the dust container.

– Is the coarse dirt filter(1) clogged with dust?

▷Empty the coarse dirt filter.

– Is the rotational airflow unit(17) or the filter(16) clogged

with dust?

▷Clean the rotational airflow unit and the filter.

– Is the capacity of the rechargeable battery(4) insuffi-

cient?

▷Charge the rechargeable battery.

If sufficient suction power is not achieved after following

these steps, please contact a Bosch customer service agent.

After-Sales Service and Application Service

Our after-sales service responds to your questions concern-

ing maintenance and repair of your product as well as spare

parts. You can find explosion drawings and information on

spare parts at: www.bosch-pt.com

The Bosch product use advice team will be happy to help you

with any questions about our products and their accessor-

ies.

In all correspondence and spare parts orders, please always

include the 10‑digit article number given on the nameplate

of the product.

Great Britain

Robert Bosch Ltd. (B.S.C.)

P.O. Box 98

Broadwater Park

North Orbital Road

Denham Uxbridge

UB 9 5HJ

At www.bosch-pt.co.uk you can order spare parts or arrange

the collection of a product in need of servicing or repair.

Tel. Service: (0344) 7360109

E-Mail: boschservicecentre@bosch.com

You can find further service addresses at:

www.bosch-pt.com/serviceaddresses

1 609 92A 7MU | (17.05.2022) Bosch Power Tools

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch GAS 18V-1 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info