Bedienungsanleitung Bosch GAS 35 L SFC PLUS Professional (Seite 19 von 230) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

594769

Zoom out

Zoom in

Vorherige Seite

1/230

Nächste Seite

English | 19

Bosch Power Tools 1 609 92A 0XC | (29.9.14)

Technical Data

Declaration of Conformity

We declare under our sole responsibility that the product de-

scribed under “Technical Data” is in conformity with all rele-

vant provisions of the directives 2011/65/EU, 2014/30/EU,

2006/42/EC including their amendments and complies with

the following standards: EN 60335-1, EN 60335-2-69.

Technical file (2006/42/EC) at:

Robert Bosch GmbH, PT/ETM9,

70764 Leinfelden-Echterdingen, GERMANY

Robert Bosch GmbH, Power Tools Division

70764 Leinfelden-Echterdingen, GERMANY

Leinfelden, 30.09.2014

Assembly

 Before any work on the vacuum cleaner itself, pull the

mains plug.

Mounting the Vacuum-hose Holder (see figure A)

– Slide the vacuum-hose holders 4 firmly from above into the

retainers 30 intended for this purpose, until they engage.

Mounting the Vacuum Hose (see figure B)

–Mount the vacuum hose 21 onto the hose connection

piece 2 and turn it in clockwise direction to the stop.

Note: While vacuuming, an electrostatic charge develops in

the vacuum hose and accessories caused by the friction of the

dust, which the operator could experience in the form of stat-

ic discharging (dependent on environmental influences and

physical perception).

As a general rule, Bosch recommends using an anti-static vac-

uum hose (accessory) when vacuuming fine dusts and dry

materials.

Mounting VAC Accessories

The vacuum hose 21 and the SFC+ module 20 are equipped

with a clip system, with which the VAC accessories (tool

sleeve 19, elbow 22) can be connected.

Mounting the Tool Sleeve (see figure C)

–Mount the SFC+ module 20 onto the vacuum hose 21 until

both snap-fasteners 31 of the vacuum hose can be heard

to engage.

– Afterwards, mount the tool sleeve 19 onto the SFC+ mod-

ule 20 until both snap-fasteners 31 of the SFC+ module

can be heard to engage.

– To disassemble, press both snap-fasteners 31 inward and

pull the components apart.

Mounting Nozzles and Tubes (see figure D)

–Mount the elbow 22 onto the vacuum hose 21 until both

snap-fasteners 31 of the vacuum hose can be heard to en-

gage.

– Afterwards, mount the desired VAC accessory (floor noz-

zle, crevice nozzle, vacuum tube, etc.) firmly onto the el-

bow 22.

– To disassemble, press both snap-fasteners 31 inward and

pull the components apart.

Inserting/Removing a Disposal Bag or Dust

Bag (Dry Vacuuming) (see figures E1 – E2)

For dry vacuuming, a disposal bag 23 or a dust bag (accesso-

ry) can be used. This makes the disposal of the dust easier.

Note: When using a paper filter bag, the semi-automatic filter

cleaning (SFC+) (see “Deactivating the SFC+”, page 21),

must, and when using a fleece filter bag, should be shut off.

Wet/dry vacuum cleaner GAS 35 L SFC+

Article number

3 601 JC3 0..

Rated power input

W1200

Frequency Hz 50/60

Container volume (gross)

l35

Net volume (for fluids)

l19

Dust bag contents

l19

Max. vacuum*

–Vacuum cleaner

–Turbine

hPa

230

254

Max. flow rate*

–Vacuum cleaner

–Turbine

l/s

0.036

0.074

Max. vacuum capacity

W 1380

Surface of flat-fold filter

0.615

Dust category L

Weight according to

EPTA-Procedure 01/2003

kg 12.2

Protection class

Degree of protection IP X4

* Measured with a Ø 35 mm and 3 m long vacuum hose

The values given are valid for nominal voltages [U] of 230 V. For lower

voltage and models for specific countries, these values can vary.

Automatic Start/Stop feature*

Rated voltage max. power output min. power output

EU 220–240 V 2200 W 100 W

110 V 750 W 100 W

240 V 1800 W 100 W

230 V 1100 W 100 W

* Specification of the allowable load of the connected power tool (coun-

try-specific)

Henk Becker

Executive Vice President

Engineering

Helmut Heinzelmann

Head of Product Certification

PT/ETM9

OBJ_BUCH-1702-003.book Page 19 Monday, September 29, 2014 2:58 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch GAS 35 L SFC PLUS Professional Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info