Bedienungsanleitung Bosch GBH 18V-34 CF (Seite 18 von 337) (Alle Sprachen)

786259

Zoom out

Zoom in

Vorherige Seite

1/337

Nächste Seite

18 | English

Safety instructions when using long drill bits with rotary

hammers

uAlways start drilling at low speed and with the bit tip

in contact with the workpiece. At higher speeds, the bit

is likely to bend if allowed to rotate freely without contact-

ing the workpiece, resulting in personal injury.

uApply pressure only in direct line with the bit and do

not apply excessive pressure. Bits can bend, causing

breakage or loss of control, resulting in personal injury.

Additional safety information

uUse suitable detectors to determine if there are hid-

den supply lines or contact the local utility company

for assistance. Contact with electric cables can cause

fire and electric shock. Damaging gas lines can lead to ex-

plosion. Breaking water pipes causes property damage.

uAlways wait until the power tool has come to a com-

plete stop before placing it down. The application tool

can jam and cause you to lose control of the power tool.

uSecure the workpiece. A workpiece clamped with

clamping devices or in a vice is held more secure than by

hand.

uIn case of damage and improper use of the battery, va-

pours may be emitted. The battery can set alight or ex-

plode. Ensure the area is well ventilated and seek medical

attention should you experience any adverse effects. The

vapours may irritate the respiratory system.

uDo not open the battery. There is a risk of short-circuit-

ing.

uThe battery can be damaged by pointed objects such

as nails or screwdrivers or by force applied externally.

An internal short circuit may occur, causing the battery to

burn, smoke, explode or overheat.

uOnly use the battery with products from the manufac-

turer. This is the only way in which you can protect the

battery against dangerous overload.

Protect the battery against heat, e.g. against

continuous intense sunlight, fire, dirt, water

and moisture. There is a risk of explosion and

short-circuiting.

uDo not touch any application tools or adjacent housing

components shortly after operation. These can become

very hot during operation and cause burns.

uThe application tool may jam during drilling. Make

sure you have a stable footing and hold the power tool

firmly with both hands. Otherwise you could lose con-

trol of the power tool.

uTake care when carrying out demolition work using

the chisel. Falling fragments of the demolition material

could injure you or any bystanders.

uHold the power tool firmly with both hands and make

sure you have a stable footing. The power tool can be

more securely guided with both hands.

uCaution! When using the power tool with Bluetooth®, a

fault may occur in other devices and systems, aero-

planes and medical devices (e.g. pacemakers, hearing

aids). Also, damage to people and animals in the im-

mediate vicinity cannot be completely excluded. Do

not use the power tool with Bluetooth® in the vicinity of

medical devices, petrol stations, chemical plants,

areas with a potentially explosive atmosphere or in

blasting areas. Do not use the power tool with

Bluetooth® in aircraft. Avoid using the product near

your body for extended periods.

The Bluetooth® word mark and logos are registered trade-

marks owned by Bluetooth SIG, Inc. and any use of such

marks by Robert Bosch Power Tools GmbH is under li-

cense.

Product Description and

Specifications

Read all the safety and general instructions.

Failure to observe the safety and general in-

structions may result in electric shock, fire

and/or serious injury.

Please observe the illustrations at the beginning of this oper-

ating manual.

Intended Use

The power tool is intended for hammer drilling in concrete,

masonry and stone, as well as for light and medium difficulty

chiselling work.

Power tools with impact action shut-off or drill chucks for

straight shank drill bits are also suitable for drilling without

impact in wood, metal, ceramic and plastic.

With the Bluetooth® Low Energy Module GCY42 inserted,

power tool data and settings can be transferred between the

power tool and a mobile device by means of Bluetooth® wire-

less technology.

Product Features

The numbering of the product features refers to the diagram

of the power tool on the graphics page.

(1) Keyless quick-change chuck with integrated im-

pact stop

(2) SDS plus quick-change chuck

(3) SDS plus tool holder

(4) Dust protection cap

(5) Locking sleeve

(6) Locking ring for quick-change chuck

(7) Combi switch for operating modes and clockwise/

anticlockwise rotation

(8) Vibration damping

(9) Lock-on button for on/off switch

(10) Handle (insulated gripping surface)

(11) On/off switch

(12) Rechargeable batterya)

(13) Cover for GCY42 Bluetooth® Low Energy Module

(14) Worklight

1 609 92A 7SJ | (23.06.2022) Bosch Power Tools

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch GBH 18V-34 CF Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info