Bedienungsanleitung Bosch GBH 4-32 DFR Professional (Seite 13 von 188) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

591885

Zoom out

Zoom in

Vorherige Seite

1/188

Nächste Seite

English | 13

Bosch Power Tools 1 619 92A 06G | (2.12.13)

Hammer Safety Warnings

 Wear ear protectors. Exposure to noise can cause hear-

ing loss.

 Use auxiliary handle(s), if supplied with the tool. Loss

of control can cause personal injury.

 Hold the tool by the insulated gripping surfaces when

performing operations where the application tool or

the screw could contact hidden wiring or its own power

cord. Contact with a “live” wire will also make exposed

metal parts of the power tool “live” and shock the operator.

 Use suitable detectors to determine if utility lines are

hidden in the work area or call the local utility company

for assistance. Contact with electric lines can lead to fire

and electric shock. Damaging a gas line can lead to explo-

sion. Penetrating a water line causes property damage or

may cause an electric shock.

 When working with the machine, always hold it firmly

with both hands and provide for a secure stance. The

power tool is guided more secure with both hands.

 Secure the workpiece. A workpiece clamped with clamp-

ing devices or in a vice is held more secure than by hand.

 Always wait until the machine has come to a complete

stop before placing it down. The tool insert can jam and

lead to loss of control over the power tool.

Products sold in GB only: Your product is fitted with a

BS 1363/A approved electric plug with internal fuse (ASTA

approved to BS 1362).

If the plug is not suitable for your socket outlets, it should be

cut off and an appropriate plug fitted in its place by an author-

ised customer service agent. The replacement plug should

have the same fuse rating as the original plug.

The severed plug must be disposed of to avoid a possible

shock hazard and should never be inserted into a mains sock-

et elsewhere.

Products sold in AUS and NZ only: Use a residual current de-

vice (RCD) with a rated residual current of 30 mA or less.

Product Description and Specifica-

tions

Read all safety warnings and all instruc-

tions. Failure to follow the warnings and in-

structions may result in electric shock, fire

and/or serious injury.

While reading the operating instructions, unfold the graphics

page for the machine and leave it open.

Intended Use

The machine is intended for hammer drilling in concrete,

brick and stone, as well as for light chiselling work. It is also

suitable for drilling without impact in wood, metal, ceramic

and plastic. Machines with electronic control and right/left ro-

tation are also suitable for screwdriving.

Product Features

The numbering of the product features refers to the illustra-

tion of the machine on the graphics page.

1 SDS-plus tool holder

2 Dust protection cap

3 Locking sleeve

4 Lock ring of the tool holder

5 Mode selector switch

6 Vibration damper

7 On/Off switch

8 Rotational direction switch

9 Button for depth stop adjustment

10 Auxiliary handle (insulated gripping surface)

11 Depth stop

12 Handle (insulated gripping surface)

13 Quick change keyless chuck*

14 Front sleeve of the quick change keyless chuck*

15 Retaining ring of the quick change keyless chuck*

16 Extraction sleeve of the dust extraction attachment*

17 Clamping screw for the dust extraction attachment*

18 Depth stop of the dust extraction attachment*

19 Telescopic pipe of the dust extraction attachment*

20 Wing bolt of the dust extraction attachment*

21 Guide pipe of the dust extraction attachment*

*Accessories shown or described are not part of the standard de-

livery scope of the product. A complete overview of accessories

can be found in our accessories program.

Technical Data

Rotary Hammer GBH 4-32 DFR

Article number

3 611 C32 0..

3 611 C32 1..

Rated power input

W900

Speed

min

-1

0–760

Impact rate

min

-1

0 –3600

Impact energy per stroke

according to

EPTA-Procedure 05/2009

J4.2

Chisel positions

Tool holder

SDS-plus

Lubrication

Central permanent

lubrication

Max. drilling dia.

– Concrete (with twist drill)

– Brickwork (with core bit)

– Steel

– Wood

Weight according to

EPTA-Procedure 01/2003

kg 4.7

Protection class

/II

The values given are valid for a nominal voltage [U] of 230 V. For differ-

ent voltages and models for specific countries, these values can vary.

OBJ_BUCH-337-007.book Page 13 Monday, December 2, 2013 12:32 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch GBH 4-32 DFR Professional Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info