Bedienungsanleitung Bosch GBM 13-2 Professional (Seite 20 von 129) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

591837

Zoom out

Zoom in

Vorherige Seite

1/129

Nächste Seite

20 | English

2 609 932 788 | (20.12.10) Bosch Power Tools

Removing the Securing Screw

The keyless chuck 1 as well as the key type drill

chuck 14 is secured with a securing screw 17

against unintentional loosening from the drill

spindle. Completely open the keyless chuck 1 or

the key type drill chuck 14 and unscrew the se-

curing screw 17 in clockwise direction. Please

note that the securing screw has a left-hand

thread.

If the securing screw 17 is seated tightly, apply

a screwdriver to the screw head and loosen the

securing screw by giving a blow onto the handle

of the screwdriver.

Dismounting the Key Type Drill Chuck

(see figure E)

To dismount the key type drill chuck 14, position

an open-end spanner 18 (size 17 mm) against

the spanner flats of the drive spindle.

Place the machine on a firm surface, e. g. a work

bench. Insert the chuck key 13 into one of the

three holes of the key type drill chuck 14 and

loosen the key type drill chuck 14 with this lever

by turning in anticlockwise direction. A tightly

seated key type drill chuck is is loosened with a

light blow on the chuck key 13. Remove the

chuck key 13 from the key type drill chuck and

completely unscrew it from the machine.

Dismounting the Keyless Chuck

To remove the keyless chuck 1, clamp an Allen

key into the keyless chuck 1 and position the

open-end wrench 18 (size 17) against the span-

ner flats of the drive spindle. Place the machine

on a firm surface, e.g. a workbench. Hold the

open-end wrench 18 firmly and loosen the key-

less chuck 1 by turning the Allen key in anti-

clockwise direction. A tightly sitting keyless

chuck is loosened with a light blow onto the

long end of the Allen key. Remove the Allen key

from the keyless chuck and completely unscrew

it from the machine.

Mounting the Drill Chuck

The keyless chuck/key type drill chuck is mount-

ed in reverse order.

The drill chuck must be tightened with a

tightening torque of approx. 15 Nm.

Screw securing screw 17 in anticlockwise direc-

tion into the open keyless/key type drill chuck.

Always use a new securing screw, as the thread-

locking compound on its thread loses its effect

after multiple usage.

Dust/Chip Extraction

f Dusts from materials such as lead-containing

coatings, some wood types, minerals and

metal can be harmful to one’s health. Touch-

ing or breathing-in the dusts can cause aller-

gic reactions and/or lead to respiratory infec-

tions of the user or bystanders.

Certain dusts, such as oak or beech dust, are

considered as carcinogenic, especially in

connection with wood-treatment additives

(chromate, wood preservative). Materials

containing asbestos may only be worked by

specialists.

– Provide for good ventilation of the work-

ing place.

– It is recommended to wear a P2 filter-

class respirator.

Observe the relevant regulations in your

country for the materials to be worked.

f Prevent dust accumulation at the work-

place. Dusts can easily ignite.

Operation

Starting Operation

f Observe correct mains voltage! The voltage

of the power source must agree with the

voltage specified on the nameplate of the

machine. Power tools marked with 230 V

can also be operated with 220 V.

Reversing the Rotational Direction

(GBM 10-2 RE/GBM 13-2 RE)

The rotational direction switch 7 is used to re-

verse the rotational direction of the machine.

However, this is not possible with the On/Off

switch 6 actuated.

OBJ_BUCH-321-003.book Page 20 Monday, December 20, 2010 8:40 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch GBM 13-2 Professional Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info