Bedienungsanleitung Bosch GBM 23-2 E (Seite 17 von 92) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

78817

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

English | 17

Bosch Power Tools 1 609 929 T43 | (12.11.09)

Declaration of Conformity

We declare under our sole responsibility that

the product described under “Technical Data” is

in conformity with the following standards or

standardization documents: EN 60745 accord-

ing to the provisions of the directives

2004/108/EC, 98/37/EC (until 28 Dec 2009),

2006/42/EC (from 29 Dec 2009).

Technical file at:

Robert Bosch GmbH, PT/ESC,

D-70745 Leinfelden-Echterdingen

Robert Bosch GmbH, Power Tools Division

D-70745 Leinfelden-Echterdingen

26.10.2009

Assembly

f Before any work on the machine itself, pull

the mains plug.

Auxiliary Handle

f Operate your machine only with the auxilia-

ry handle 2.

Screw the auxiliary handle 2 into the thread 9 on

the gear head.

Changing the Tool

Drilling tools with a MK2 morse taper can be in-

serted directly into the tool holder 4. For drill

bits with MK1 morse taper, use the reducing

sleeve 11.

Pay attention that the morse cone and the

morse taper are free of grease.

The use of drilling tools with cylindrical shank is

possible with the key chuck 13. For this, place

the tapered arbor 12 into the tool holder 4 and

firmly screw on the key chuck 13.

f Do not exert any force when inserting the

morse taper or the tapered arbor. This can

damage the tool holder and the inserted tool.

Before removing the inserted tool, unscrew the

auxiliary handle 2.

Place the drift 10 into the opening 3 in such a

manner that the rounded-off side faces to the

pressure plate 1.

If the drift 10 cannot be inserted through the

drive spindle, turn the tool insert a little.

Press the drift 10 toward the pressure plate 1

and release the tool insert from out of the tool

holder.

Dust/Chip Extraction

f Dusts from materials such as lead-containing

coatings, some wood types, minerals and

metal can be harmful to one’s health. Touch-

ing or breathing-in the dusts can cause aller-

gic reactions and/or lead to respiratory infec-

tions of the user or bystanders.

Certain dusts, such as oak or beech dust, are

considered as carcinogenic, especially in

connection with wood-treatment additives

(chromate, wood preservative). Materials

containing asbestos may only be worked by

specialists.

– Provide for good ventilation of the work-

ing place.

– It is recommended to wear a P2 filter-

class respirator.

f Observe the relevant regulations in your

country for the materials to be worked.

Operation

Starting Operation

f Observe correct mains voltage! The voltage

of the power source must agree with the

voltage specified on the nameplate of the

machine. Power tools marked with 230 V

can also be operated with 220 V.

Gear Selection, Mechanical

f Actuate the gear selector 7 only when the

machine is at a standstill.

Two speed ranges can be preselected with the

gear selector 7.

Dr. Egbert Schneider

Senior Vice President

Engineering

Dr. Eckerhard Strötgen

Head of Product

Certification

OBJ_BUCH-35-003.book Page 17 Thursday, November 12, 2009 5:37 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch GBM 23-2 E Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info