Bedienungsanleitung Bosch GBM6 (Seite 18 von 103) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

32107

Zoom out

Zoom in

Vorherige Seite

1/103

Nächste Seite

1 609 929 M62 | (12.9.07) Bosch Power Tools

18 | English

Changing the Tool

f Before any work on the machine itself, pull

the mains plug.

f Wear protective gloves when changing the

tool. The drill chuck can become very hot dur-

ing longer work periods.

Keyless Chuck (see figure B)

Hold the rear sleeve 12 of the keyless chuck 10

tight and turn the front sleeve 11 in rotation di-

rection n, until the tool can be inserted. Insert

the tool.

Hold the rear sleeve 12 of the keyless chuck 10

tight and firmly tighten the front sleeve 11 by

hand in rotation direction o, until the locking ac-

tion (click) is heard. The drill chuck is locked au-

tomatically.

The locking is released again to remove the tool

when the front sleeve 11 is turned in the oppo-

site direction.

Key Type Drill Chuck (see figure C)

Open the key type drill chuck 1 by turning until

the tool can be inserted. Insert the tool.

Insert the chuck key 13 into the corresponding

holes of the key type drill chuck 1 and clamp the

tool uniformly.

Screwdriver Tools (see figure D)

When working with screwdriver bits 14, a univer-

sal bit holder 15 should always be used. Use only

screwdriver bits that fit the screw head.

Replacing the Drill Chuck

f Before any work on the machine itself, pull

the mains plug.

Dismounting the Key Type Drill Chuck

(see figure E)

To dismount the key type drill chuck 1, position

an open-end spanner 16 (size 11 mm) against the

spanner flats of the drive spindle.

Place the machine on a firm support, e.g., a work-

bench. Insert the chuck key 13 into one of the

three holes of the key type drill chuck 1 and re-

lease the key type drill chuck 1 with this lever by

turning in rotation direction n. Loosen a tight

seated key type drill chuck with a light blow on

the chuck key 13. Remove the chuck key 13 from

the key type drill chuck and completely unscrew

the key type drill chuck.

Dismounting the Keyless Chuck (see figure F)

To dismount the keyless chuck 10, clamp an Allen

key 17 into the keyless chuck 10 and position an

open-end spanner 16 (size 11 mm) against the

spanner flats of the drive spindle. Place the ma-

chine on a firm support, e.g., a workbench. Hold

the open-end spanner 16 firmly and loosen the

keyless chuck 10 by turning the Allen key 17 in ro-

tation direction n. Loosen a tight seated keyless

chuck by giving the long end of the Allen key 17 a

blow. Remove the Allen key from the keyless

chuck and completely unscrew the keyless

chuck.

Mounting the Drill Chuck

The keyless chuck/key type drill chuck is mount-

ed in reverse order.

The drill chuck must be tightened with a

tightening torque of approx. 25–30 Nm.

Dust/Chip Extraction

f Dusts from materials such as lead-containing

coatings, some wood types, minerals and

metal can be harmful to one’s health. Touch-

ing or breathing-in the dusts can cause aller-

gic reactions and/or lead to respiratory infec-

tions of the user or bystanders.

Certain dusts, such as oak or beech dust, are

considered as carcinogenic, especially in con-

nection with wood-treatment additives (chro-

mate, wood preservative). Materials contain-

ing asbestos may only be worked by

specialists.

– Use dust extraction whenever possible.

– Provide for good ventilation of the working

place.

– It is recommended to wear a P2 filter-class

respirator.

Observe the relevant regulations in your coun-

try for the materials to be worked.

OBJ_BUCH-513-001.book Page 18 Wednesday, September 12, 2007 12:49 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch GBM6 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch GBM6

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info