Bedienungsanleitung Bosch GDB 1600 DE (Seite 17 von 314) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

544267

Zoom out

Zoom in

Vorherige Seite

1/314

Nächste Seite

English | 17

Bosch Power Tools 1 609 929 V13 | (18.11.10)

f Wear non-skid shoes. This prevents injuries

that can occur from slipping on smooth sur-

faces.

f Use only original Bosch accessories.

f Connect the machine to a mains supply with

proper earthing connection. Socket outlet

and extension cable must be equipped with

an operative protective conductor.

f Products sold in GB only: Your product is fit-

ted with an BS 1363/A approved electric

plug with internal fuse (ASTA approved to

BS 1362).

If the plug is not suitable for your socket out-

lets, it should be cut off and an appropriate

plug fitted in its place by an authorised cus-

tomer service agent. The replacement plug

should have the same fuse rating as the orig-

inal plug.

The severed plug must be disposed of to

avoid a possible shock hazard and should

never be inserted into a mains socket else-

where.

Products sold in AUS and NZ only: Use a re-

sidual current device (RCD) with a rated re-

sidual current of 30 mA or less.

Instructions for operation without drill stand

f Use auxiliary handle(s), if supplied with the

tool. Loss of control can cause personal

injury.

f Always wait until the machine has come to

a complete stop before placing it down. The

tool insert can jam and lead to loss of control

over the power tool.

f When working with the machine, always

hold it firmly with both hands and provide

for a secure stance. The power tool is guided

more secure with both hands.

f If the application tool should become

blocked, switch the machine off. Loosen

the application tool.

f Before switching on the power tool, make

sure that the application tool moves freely.

When switching on with a blocked drilling

tool, high torque reaction can occur.

Instructions for operation with drill stand

f Never leave the machine before it has come

to a complete stop. Cutting tools that are

still running can cause injuries.

f Hold the drill stand by the insulated grip-

ping surfaces when performing operations

where the application tool could contact

hidden wiring or its own power cord. Con-

tact with a “live” wire will also make exposed

metal parts of the drill stand “live” and shock

the operator.

Instructions for the GDB 1600 WE

Never operate the machine with-

out the residual current device

(RCD) provided.

f Before starting work, check the proper

function of the residual current device

(RCD). Have a damaged residual current de-

vice (RCD) repaired or replaced by your

Bosch after-sales service agent.

f Pay attention that neither persons in the

working area nor the power tool itself come

into contact with the water that comes out.

When wet-drilling

overhead, the water

coming out must be

collected. For this, in-

sert the machine into a

drill stand and mount a

water collection ring.

Pay attention that water-conducting hoses,

connnection elements and the water collec-

tion ring (accessory) are in proper condi-

tion. Replace damaged or worn parts before

using the next time. Water coming out of

power tool components increases the risk of

electric shock.

OBJ_BUCH-116-003.book Page 17 Thursday, November 18, 2010 11:49 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch GDB 1600 DE Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info