Bedienungsanleitung Bosch gdr 10 8v li (Seite 19 von 224) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

381461

Zoom out

Zoom in

Vorherige Seite

1/224

Nächste Seite

English | 19

Bosch Power Tools 1 609 929 T06 | (21.10.09)

Changing the Tool (see figure B)

f Before any work on the machine (e. g.,

maintenance, tool change, etc.) as well as

during transport and storage, set the rota-

tional direction switch to the centre posi-

tion. Unintentional actuation of the On/Off

switch can lead to injuries.

Inserting

Pull the locking sleeve 3 forward, push the in-

sert tool to the stop into the tool holder 2 and

release the locking sleeve 3 to lock the insert

tool.

Use only screwdriver bits with ball catch 1

(DIN 3126-E6.3). Other screwdriver bits 11 can

be used with a universal bit holder with ball

catch 10.

Removing

Pull the locking sleeve 3 forward and remove the

insert tool.

Operation

Method of Operation

The tool holder 2 with the tool is driven by an

electric motor via a gear and impact mechanism.

The working procedure is divided into two phas-

es:

Screwing in and tightening (impact mechanism

in action).

The impact mechanism is activated as soon as

the screwed connection runs tight and thus load

is put on the motor. In this instance, the impact

mechanism converts the power of the motor to

steady rotary impacts. When loosening screws

or nuts, the process is reversed.

Starting Operation

Inserting the Battery

f Use only original Bosch lithium ion batter-

ies with the voltage listed on the nameplate

of your power tool. Using other batteries can

lead to injuries and pose a fire hazard.

Note: Use of batteries not suitable for the ma-

chine can lead to malfunctions of or cause dam-

age to the power tool.

Set the rotational direction switch 7 to the cen-

tre position in order to avoid unintentional start-

ing. Insert the charged battery 6 into the handle

so that it can be felt to engage and faces flush

against the handle.

Reversing the Rotational Direction

(see figure C)

The rotational direction switch 7 is used to re-

verse the rotational direction of the machine.

However, this is not possible with the On/Off

switch 8 actuated.

Right rotation: For driving in screws and tight-

ening nuts, press the rotational direction switch

7 through to the left stop.

Left Rotation: For loosening and unscrewing

screws and nuts, press the rotational direction

switch 7 through to the right stop.

Switching On and Off

To start the machine, press the On/Off switch 8

and keep it pressed.

The power light 4 lights up when the On/Off

switch 8 is slightly or completely pressed, and

allows the work area to be illuminated when

lighting conditions are insufficient.

To switch off the machine, release the On/Off

switch 8.

Adjusting the Speed

The speed of the switched on power tool can be

variably adjusted, depending on how far the

On/Off switch 8 is pressed.

Light pressure on the On/Off switch 8 results in

a low rotational speed. Further pressure on the

switch results in an increase in speed.

Temperature Dependent Overload Protection

When using as intended for, the power tool can-

not be subject to overload. When the load is too

high or the allowable battery temperature range

of 0–70 °C is exceeded, the speed is reduced.

The power tool will not run at full speed until

reaching the allowable battery temperature.

OBJ_BUCH-223-003.book Page 19 Wednesday, October 21, 2009 8:06 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch gdr 10 8v li Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info