Bedienungsanleitung Bosch gdr 18 v li (Seite 23 von 281) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

381578

Zoom out

Zoom in

Vorherige Seite

1/281

Nächste Seite

English | 23

Bosch Power Tools 2 609 140 816 | (26.10.10)

Tips

Before screwing larger, longer screws into hard

materials, it is advisable to predrill a pilot hole

with the core diameter of the thread to approx.

of the screw length.

Belt Clip

With the belt clip 4, the machine can be hung

onto a belt. The user has both hands free and

the machine is always at hand.

Recommendations for Optimal Handling of the

Battery

Protect the battery against moisture and water.

Store the battery only within a temperature

range between 0 °C and 45 °C. As an example,

do not leave the battery in the car in summer.

Occasionally clean the venting slots of the bat-

tery using a soft, clean and dry brush.

A significantly reduced working period after

charging indicates that the battery is used and

must be replaced.

Observe the notes for disposal.

Maintenance and Service

Maintenance and Cleaning

f Before any work on the machine (e. g.,

maintenance, tool change, etc.) as well as

during transport and storage, set the rota-

tional direction switch to the centre posi-

tion. Unintentional actuation of the On/Off

switch can lead to injuries.

f For safe and proper working, always keep

the machine and ventilation slots clean.

Replacing the Carbon Brushes (see figure C)

Check the length of the carbon brushes approx.

every 2–3 months and replace the carbon

brushes if required.

Never replace only a single carbon brush!

Note: Use only carbon brushes supplied by

Bosch and intended specifically for your prod-

uct.

– Unscrew the caps 15 using a suitable screw-

driver.

– Replace the spring-loaded carbon brushes

14 and screw the caps back on again.

If the machine should fail despite the care taken

in manufacturing and testing procedures, repair

should be carried out by an after-sales service

centre for Bosch power tools.

In all correspondence and spare parts order,

please always include the 10-digit article

number given on the type plate of the machine.

After-sales Service and Customer As-

sistance

Our after-sales service responds to your ques-

tions concerning maintenance and repair of your

product as well as spare parts. Exploded views

and information on spare parts can also be

found under:

www.bosch-pt.com

Our customer service representatives can an-

swer your questions concerning possible appli-

cations and adjustment of products and acces-

sories.

Great Britain

Robert Bosch Ltd. (B.S.C.)

P.O. Box 98

Broadwater Park

North Orbital Road

Denham

Uxbridge

UB 9 5HJ

Tel. Service: +44 (0844) 736 0109

Fax: +44 (0844) 736 0146

E-Mail: boschservicecentre@bosch.com

Ireland

Origo Ltd.

Unit 23 Magna Drive

Magna Business Park

City West

Dublin 24

Tel. Service: +353 (01) 4 66 67 00

Fax: +353 (01) 4 66 68 88

OBJ_BUCH-832-002.book Page 23 Tuesday, October 26, 2010 1:29 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch gdr 18 v li Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info