Bedienungsanleitung Bosch GDS 18V-1050 H (Seite 18 von 307) (Alle Sprachen)

786139

Zoom out

Zoom in

Vorherige Seite

1/307

Nächste Seite

18 | English

Service

uHave your power tool serviced by a qualified repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is maintained.

uNever service damaged battery packs. Service of bat-

tery packs should only be performed by the manufacturer

or authorized service providers.

Safety Warnings for Impact Wrenches

uHold the power tool by insulated gripping surfaces,

when performing an operation where the fastener

may contact hidden wiring or its own cord. Fasteners

contacting a "live" wire may make exposed metal parts of

the power tool "live" and could give the operator an elec-

tric shock.

uHold the power tool by insulated gripping surfaces,

when performing an operation where the fastener

may contact hidden wiring. Fasteners contacting a "live"

wire may make exposed metal parts of the power tool

"live" and could give the operator an electric shock.

uUse suitable detectors to determine if there are hid-

den supply lines or contact the local utility company

for assistance. Contact with electric cables can cause

fire and electric shock. Damaging gas lines can lead to ex-

plosion. Breaking water pipes causes property damage.

uUse suitable detectors to determine if utility lines are

hidden in the work area or call the local utility com-

pany for assistance. Contact with electric lines can lead

to fire and electric shock. Damaging a gas line can lead to

explosion. Penetrating a water line causes property dam-

age or may cause an electric shock.

uHold the power tool securely. When tightening and

loosening screws be prepared for temporarily high torque

reactions.

uSecure the workpiece. A workpiece clamped with

clamping devices or in a vice is held more secure than by

hand.

uBefore any work on the power tool (e.g. maintenance,

tool change, etc.) as well as during transport and stor-

age, set the rotational direction switch to the middle

position. There is risk of injury from unintentionally

pressing the on/off switch.

uAlways wait until the power tool has come to a com-

plete stop before placing it down. The application tool

can jam and cause you to lose control of the power tool.

uIn case of damage and improper use of the battery, va-

pours may be emitted. The battery can set alight or ex-

plode. Ensure the area is well ventilated and seek medical

attention should you experience any adverse effects. The

vapours may irritate the respiratory system.

uDo not open the battery. There is a risk of short-circuit-

ing.

uThe battery can be damaged by pointed objects such

as nails or screwdrivers or by force applied externally.

An internal short circuit may occur, causing the battery to

burn, smoke, explode or overheat.

uOnly use the battery with products from the manufac-

turer. This is the only way in which you can protect the

battery against dangerous overload.

Protect the power tool against heat, e.g.

against continuous intense sunlight, fire,

water, and moisture. There is a risk of explo-

sion.

Protect the battery against heat, e.g. against

continuous intense sunlight, fire, dirt, water

and moisture. There is a risk of explosion and

short-circuiting.

uConnect the power tool to a mains supply that is prop-

erly connected to earth. The socket and extension cable

must have a fully functioning protective conductor.

Products sold in GB only:

Your product is fitted with an BS 1363/A approved electric

plug with internal fuse (ASTA approved to BS 1362).

If the plug is not suitable for your socket outlets, it should be

cut off and an appropriate plug fitted in its place by an au-

thorised customer service agent. The replacement plug

should have the same fuse rating as the original plug.

The severed plug must be disposed of to avoid a possible

shock hazard and should never be inserted into a mains

socket elsewhere.

uApplication tools can become hot during operation.

There is a risk of burns when changing the application

tool. Use protective gloves to remove the application

tool.

uCaution! When using the power tool with Bluetooth®, a

fault may occur in other devices and systems, aero-

planes and medical devices (e.g. pacemakers, hearing

aids). Also, damage to people and animals in the im-

mediate vicinity cannot be completely excluded. Do

not use the power tool with Bluetooth® in the vicinity of

medical devices, petrol stations, chemical plants,

areas with a potentially explosive atmosphere or in

blasting areas. Do not use the power tool with

Bluetooth® in aircraft. Avoid using the product near

your body for extended periods.

The Bluetooth® word mark and logos are registered trade-

marks owned by Bluetooth SIG, Inc. and any use of such

marks by Robert Bosch Power Tools GmbH is under li-

cense.

Product Description and

Specifications

Read all the safety and general instructions.

Failure to observe the safety and general in-

structions may result in electric shock, fire

and/or serious injury.

Please observe the illustrations at the beginning of this oper-

ating manual.

1 609 92A 7X5 | (04.07.2022) Bosch Power Tools

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch GDS 18V-1050 H Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info