Bedienungsanleitung Bosch GEX 12V-125 (Seite 17 von 211) (Alle Sprachen)

786280

Zoom out

Zoom in

Vorherige Seite

1/211

Nächste Seite

English | 17

For fatigue-free work, you can hold the power tool from

above, from the side or from the front, depending on the ap-

plication (see figureH).

Sanding Surfaces

Switch the power tool on, place the entire sanding surface

against the surface of the workpiece and apply moderate

pressure as you move the sander over the workpiece.

The material removal rate and sanding result are primarily

determined by the choice of sanding sheet, the preselected

orbital stroke rate level and the contact pressure.

Only immaculate sanding sheets achieve good sanding per-

formance and make the power tool last longer.

Be sure to apply consistent contact pressure in order to in-

crease the lifetime of the sanding sheets.

Excessively increasing the contact pressure will not lead to

increased sanding performance, rather it will cause more

severe wear of the power tool and of the sanding sheet.

Use only original Bosch-sanding accessories.

Rough Sanding

Attach a coarse grit sanding sheet.

Apply only light pressure to the power tool so that it runs at a

higher orbital stroke rate and a higher material removal rate

is achieved.

Fine Sanding

Attach a fine grit sanding sheet.

You can reduce the sanding plate orbital stroke rate by

lightly varying the contact pressure or changing the orbital

stroke rate level; the random orbit motion will be retained.

Move the power tool with moderate pressure flat on the

workpiece in a circular motion or alternately along and

across it. Do not tilt the power tool in order to avoid sanding

through the workpiece, e.g. veneers.

Switch the power tool off after completing operation.

Maintenance and Service

Maintenance and Cleaning

uRemove the battery from the power tool before carry-

ing out work on the power tool (e.g. maintenance,

changing tool, etc.). The battery should also be re-

moved for transport and storage. There is risk of injury

from unintentionally pressing the on/off switch.

uTo ensure safe and efficient operation, always keep

the power tool and the ventilation slots clean.

After-Sales Service and Application Service

Our after-sales service responds to your questions concern-

ing maintenance and repair of your product as well as spare

parts. You can find explosion drawings and information on

spare parts at: www.bosch-pt.com

The Bosch product use advice team will be happy to help you

with any questions about our products and their accessor-

ies.

In all correspondence and spare parts orders, please always

include the 10‑digit article number given on the nameplate

of the product.

Great Britain

Robert Bosch Ltd. (B.S.C.)

P.O. Box 98

Broadwater Park

North Orbital Road

Denham Uxbridge

UB 9 5HJ

At www.bosch-pt.co.uk you can order spare parts or arrange

the collection of a product in need of servicing or repair.

Tel. Service: (0344) 7360109

E-Mail: boschservicecentre@bosch.com

You can find further service addresses at:

www.bosch-pt.com/serviceaddresses

Transport

The recommended lithium-ion batteries are subject to legis-

lation on the transport of dangerous goods. The user can

transport the batteries by road without further require-

ments.

When shipping by third parties (e.g.: by air transport or for-

warding agency), special requirements on packaging and la-

belling must be observed. For preparation of the item being

shipped, consulting an expert for hazardous material is re-

quired.

Dispatch battery packs only when the housing is undam-

aged. Tape or mask off open contacts and pack up the bat-

tery in such a manner that it cannot move around in the

packaging. Please also observe the possibility of more de-

tailed national regulations.

Disposal

Power tools, rechargeable batteries, accessor-

ies and packaging should be sorted for environ-

mental-friendly recycling.

Do not dispose of power tools and batteries/re-

chargeable batteries into household waste!

Only for EU countries:

According to the Directive 2012/19/EU on waste electrical

and electronic equipment and its transposition into national

law, power tools that are no longer usable, and, according to

the Directive 2006/66/EC, defective or drained batteries

must be collected separately and disposed of in an environ-

mentally correct manner.

If disposed incorrectly, waste electrical and electronic

equipment may have harmful effects on the environment and

human health, due to the potential presence of hazardous

substances.

Only for United Kingdom:

According to Waste Electrical and Electronic Equipment Reg-

ulations 2013 (2013/3113) and the Waste Batteries and

Bosch Power Tools 1 609 92A 7MX | (17.05.2022)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch GEX 12V-125 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info