Bedienungsanleitung Bosch GHA FC2 Professional (Seite 7 von 133) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

591726

Zoom out

Zoom in

Vorherige Seite

1/133

Nächste Seite

English | 7

Bosch Power Tools 1 609 92A 0YJ | (3.3.15)

English

Read and strictly observe the safety warnings in the oper-

ating instructions of the cordless drill/driver.

Hammer Safety Warnings

 Wear ear protectors. Exposure to noise can cause hear-

ing loss.

 Use the auxiliary handle provided with the GHA FC2

hammer adapter. Loss of control can cause personal in-

jury.

 Hold power tool by insulated gripping surfaces when

performing an operation where the cutting accessory

may contact hidden wiring. Cutting accessory contacting

a “live” wire may make exposed metal parts of the power

tool “live” and could give the operator an electric shock.

Additional Safety and Working

Instructions

 Wear protective gloves. The hammer adapter may be-

come hot when operated for extended periods of time.

 Before any work on the machine (e. g., maintenance,

tool change, etc.) as well as during transport and stor-

age, set the rotational direction switch to the centre

position. Unintentional actuation of the On/Off switch can

lead to injuries.

 Use appropriate detectors to determine if utility lines

are hidden in the work area or call the local utility com-

pany for assistance. Contact with electric lines can lead

to fire and electric shock. Damaging a gas line can lead to

explosion. Penetrating a water line causes property dam-

age.

 When working with the machine, always hold it firmly

with both hands and provide for a secure stance. The

power tool is guided more secure with both hands.

 Secure the workpiece. A workpiece clamped with clamp-

ing devices or in a vice is held more secure than by hand.

 Inserting SDS-plus Drilling Tools: Check the latching by

pulling the tool.

 Replace a damaged dust protection cap immediately.

The dust protection cap largely prevents the penetration of

drilling dust into the tool holder during operation. When in-

serting the tool, pay attention that the dust protection cap

is not damaged.

 Dusts from materials such as lead-containing coatings,

some wood types, minerals and metal can be harmful to

one’s health and cause allergic reactions, lead to res-

piratory infections and/or cancer. Materials containing

asbestos may only be worked by specialists.

– As far as possible, use a dust extraction system suitable

for the material.

– Provide for good ventilation of the working place.

– It is recommended to wear a P2 filter-class respirator.

Observe the relevant regulations in your country for the

materials to be worked.

 Prevent dust accumulation at the workplace. Dusts can

easily ignite.

 To save energy, only switch the power tool on when using

it.

 If the application tool should become blocked, switch

the machine off. Loosen the application tool.

 When switching on with a blocked drilling tool, high

torque reaction can occur.

 To make it easier to dismount the hammer adapter

from the power tool, run the application tool 2 to 3

turns in left rotation (see figure 9, page 132).

 Always wait until the machine has come to a complete

stop before placing it down. The tool insert can jam and

lead to loss of control over the power tool.

 Avoid unintentional switching on. Ensure the On/Off

switch is in the off position before inserting battery

pack. Carrying the power tool with your finger on the

On/Off switch or inserting the battery pack into power

tools that have the switch on invites accidents.

Symbols

The following symbols are important for reading and under-

standing the operating instructions. Please take note of the

symbols and their meaning. The correct interpretation of the

symbols will help you to use the machine in a better and safer

manner.

Symbol Meaning

GSR 14,4 V-EC FC2/

GSR 18 V-EC FC2:

Cordless Drill Driver

Grey-marked area: Handle

(insulated gripping surface)

GHA FC2:

Hammer adapter

Grey-marked area: Handle

(insulated gripping surface)

Article number

Read all safety warnings and all instruc-

tions

Before any work on the machine itself,

remove the battery from the power tool.

Wear protective gloves

OBJ_BUCH-2307-002.book Page 7 Tuesday, March 3, 2015 9:09 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch GHA FC2 Professional Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info