Bedienungsanleitung Bosch GHG 20-60 (Seite 13 von 135) (Alle Sprachen)

786517

Zoom out

Zoom in

Vorherige Seite

1/135

Nächste Seite

English | 13

Removing varnish/loosening adhesives (see figureA)

Fit the surface nozzle(6) (accessory). Briefly soften the var-

nish with hot air and remove it with a clean spatula. Long

heat exposure burns the varnish and makes removal more

difficult.

Many adhesives can be softened using heat. By heating ad-

hesives, you can break connections or remove excess adhes-

ive.

Stripping paint from window frames (seefigureB)

uThe glass protection nozzle (7) (accessory) must be

used for this application. There is a risk that the glass

may break.

You can remove the paint from profiled surfaces with a suit-

able spatula and brush it off with a soft wire brush.

Thawing frozen water pipes (see figureC)

uBefore applying heat to the pipe, check it is in fact a

water pipe. Water pipes and gas pipes often look

identical from the outside. Gas pipes must under no cir-

cumstances be heated.

Fit the angle nozzle(8) (accessory). Gradually heat the

frozen points of the pipe, starting at the outlet and moving

back towards the inlet.

Take great care when warming plastic pipes and pipe con-

nections to avoid causing damage.

Shaping plastic pipes (see figureD)

Fit the reflector nozzle(9) (accessory). Fill plastic pipes with

sand and seal them on both sides to prevent the pipe bend-

ing. Carefully and evenly heat the pipe by moving the tool

back and forth from one side to the other.

Welding plastic (see figureE)

Fit the reducing nozzle (12) and the welding shoe(11) (both

accessories). The workpiece requiring welding and the weld-

ing wire(10) (accessory) must be made from the same ma-

terial (e.g. both PVC). The seam must be clean and free from

grease.

Heat the point of the seam carefully until it becomes pliable.

Note that there is not a great difference in temperature

between pliable plastic and liquid plastic.

Apply the welding wire(10) and allow it to flow into the joint

to form an even bead.

Soft Soldering (see figure F)

For spot welding, fit the reducing nozzle (12); for welding

pipes, fit the reflector nozzle(9) (both accessories).

If you are using solder without flux, apply soldering grease or

paste to the solder joint. Heat the solder joint and apply the

solder. The solder must be melted by the temperature of the

workpiece.

If necessary, remove the flux after the solder joint has cooled

down.

Heat-shrinking (see figureG)

Fit the reflector nozzle(9) (accessory). Choose the diameter

of the heat shrink plastic tube (13) (accessory) suitable for

the workpiece. Evenly heat the heat shrink plastic tube until

it fits closely against the workpiece.

Maintenance and Service

Maintenance and Cleaning

uPull the mains plug out of the plug socket before car-

rying out any work on the heat gun.

uKeep the heat gun and the ventilation slots clean in or-

der to work safely and well.

In order to avoid safety hazards, if the power supply cord

needs to be replaced, this must be done by Bosch or by an

after-sales service centre that is authorised to repair Bosch

power tools.

After-Sales Service and Application Service

Our after-sales service responds to your questions concern-

ing maintenance and repair of your product as well as spare

parts. You can find explosion drawings and information on

spare parts at: www.bosch-pt.com

The Bosch product use advice team will be happy to help you

with any questions about our products and their accessor-

ies.

In all correspondence and spare parts orders, please always

include the 10‑digit article number given on the nameplate

of the product.

Great Britain

Robert Bosch Ltd. (B.S.C.)

P.O. Box 98

Broadwater Park

North Orbital Road

Denham Uxbridge

UB 9 5HJ

At www.bosch-pt.co.uk you can order spare parts or arrange

the collection of a product in need of servicing or repair.

Tel. Service: (0344) 7360109

E-Mail: boschservicecentre@bosch.com

You can find further service addresses at:

www.bosch-pt.com/serviceaddresses

Disposal

The heat gun, accessories and packaging should be sorted

for environmentally friendly recycling.

Do not throw heat guns in the household waste!

Only for EU countries:

According to European Directive 2012/19/EU on waste

electrical and electronic equipment and the implementation

thereof in national law, heat guns that are no longer service-

able must be collected separately and sorted for environ-

mentally friendly recycling.

If disposed incorrectly, waste electrical and electronic

equipment may have harmful effects on the environment and

human health, due to the potential presence of hazardous

substances.

Bosch Power Tools 1 609 92A 7NF | (28.04.2022)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch GHG 20-60 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info