Bedienungsanleitung Bosch GLI 18V-4000 C (Seite 13 von 163) (Alle Sprachen)

786131

Zoom out

Zoom in

Vorherige Seite

1/163

Nächste Seite

English | 13

If the cordless worklight has been switched on for approx.

five minutes, it will be switched off immediately the next

time the button is pressed.

Temperature Dependent Overload Protection

If the permissible operating temperature is exceeded, the

cordless worklight switches off. Let the cordless worklight

cool down and then switch the cordless worklight back on.

Battery Charge Indicator (Cordless Worklight)

When the cordless worklight is switched on, the five LEDs of

the battery charge indicator(6) display the state of charge

of the battery(8).

Battery charge indicator

The green LEDs on the battery charge indicator indicate the

state of charge of the battery. For reasons of safety, it is only

possible to query the state of charge when the cordless

worklight is switched off.

Press the button for the battery charge indicator or to

show the state of charge. This is also possible when the bat-

tery is removed.

If no LED lights up after pressing the button for the battery

charge indicator, then the battery is defective and must be

replaced.

Battery model GBA 18V...

LEDs Capacity

3× continuous green light 60−100%

2× continuous green light 30−60%

1× continuous green light 5−30%

1× flashing green light 0−5%

Battery model ProCORE18V...

LEDs Capacity

5× continuous green light 80−100%

4× continuous green light 60−80%

3× continuous green light 40−60%

2× continuous green light 20−40%

1× continuous green light 5−20%

1× flashing green light 0−5%

Changing the button cell (seefigureA)

A warning will be displayed in the app before the button

cell(12) is fully used up.

To open the battery compartment cover(11), turn it anti-

clockwise with a screwdriver and then lift off the battery

compartment cover. Remove the empty button cell and in-

sert a new button cell. Make sure that the battery holder is

not damaged when removing the cell. Make sure that the

positive pole of the button cell faces upwards.

Close the battery compartment cover back up.

Control Via App

The cordless worklight is fitted with a Bluetooth® module

which enables wireless data transfer to certain mobile

devices with a Bluetooth® interface (e.g. smartphone, tab-

let).

In order to control the cordless worklight via Bluetooth®, you

will need the "Bosch Toolbox" app. Download the app from

the corresponding app store (AppleApp Store, Google Play

Store).

Then select the "My Tools" sub-item in the app. The display

of your mobile device will show you all subsequent steps re-

quired to connect the cordless worklight to the device.

The following functions will be available when a connection

has been established with the mobile device and authorisa-

tion has been successful:

– Remote control

– Time control

– Grouping several cordless worklights

– Personalisation

– Status check, output of warning messages

– General information and settings

– Management

Practical Advice

Shortly before the cordless worklight switches off because

of an empty battery, it will flash three times and shine with

reduced brightness.

Errors – causes and corrective measures

Cause Corrective measures

A Bluetooth® connection cannot be established with the

cordless worklight.

The cordless worklight is not

emitting a Bluetooth® signal. Remove the button cell(12)

and battery(8) for 10

seconds.

The cordless worklight cannot be operated via

Bluetooth® even though the battery is inserted and

charged.

The Bluetooth® module is not

activated. Press the on/off switch(7)

repeatedly until the cordless

worklight can be operated

via Bluetooth®.

The cordless worklight cannot be switched on after

wireless charging.

The inductively chargeable

battery has to be re-initial-

ised.

Remove the battery(8) for

10 seconds.

The PIN for the Bluetooth® connection is not working.

The PIN must be reset to

factory settings. Remove the button cell(12)

and battery(8) for 10

seconds.

Bosch Power Tools 1 609 92A 7NL | (17.05.2022)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch GLI 18V-4000 C Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info