Bedienungsanleitung Bosch GLL 2-50 (Seite 15 von 239) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

544285

Zoom out

Zoom in

Vorherige Seite

1/239

Nächste Seite

English | 15

Bosch Power Tools 1 609 92A 0KJ | (6.5.14)

Working without Automatic Levelling (see figure D)

For work without automatic levelling, push the On/Off switch

7 to the “ on” position. When the automatic levelling is

switched off, the laser lines flash continuously.

When the automatic levelling is switched off, the measuring

tool can be held by hand or placed on an inclined surface. In

cross-line operation, the two laser lines do not necessarily run

at a right angle to each other.

Levelling Accuracy

Influences on Accuracy

The ambient temperature has the greatest influence. Especially

temperature differences occurring from the ground upward can

divert the laser beam.

Because the largest difference in temperature layers is close

to the ground, the measuring tool should always be mounted

on a tripod when measuring distances exceeding 20 m. If pos-

sible, also set up the measuring tool in the centre of the work

area.

Apart from exterior influences, device-specific influences

(such as heavy impact or falling down) can lead to deviations.

Therefore, check the accuracy of the measuring tool each

time before starting your work.

First, check both the height as well as the levelling accuracy of

the horizontal laser line, then the levelling accuracy of the ver-

tical laser line.

Should the measuring tool exceed the maximum deviation

during one of the tests, please have it repaired by a Bosch af-

ter-sales service.

Checking the Height Accuracy of the Horizontal Line

For this check, a free measuring distance of 5 m on a firm sur-

face between two walls A and B is required.

– Mount the measuring tool onto a tripod or place it on a firm

and level surface close to wall A. Switch on the measuring

tool. Select cross-line operation with automatic levelling.

– Direct the laser against the close wall A and allow the meas-

uring tool to level in. Mark the centre of the point where the

laser lines cross each other on the wall (point I).

– Turn the measuring tool by 180°, allow it to level in and

mark the cross point of the laser lines on the opposite wall

B (point II).

– Without turning the measuring tool, position it close to wall

B. Switch the measuring tool on and allow it to level in.

– Align the height of the measuring tool (using a tripod or by

underlaying, if required) in such a manner that the cross

point of the laser lines is projected against the previously

marked point II on the wall B.

– Without changing the height, turn around the measuring

tool by 180°. Direct it against the wall A in such a manner

that the vertical laser line runs through the already marked

point I. Allow the measuring tool to level in and mark the

cross point of the laser lines on the wall A (point III).

– The difference d of both marked points I and III on wall A

indicates the actual height deviation of the measuring tool.

The maximum permitted deviation d

max

is calculated as fol-

lows:

max

= double distance of the walls x 0.3 mm/m

Example: With a 5 metre distance between the walls, the

maximum deviation must not exceed

max

= 2 x 5 m x 0.3 mm/m = 3 mm. Thus, the marks must not

be more than 3 mm apart.

5 m

180˚

OBJ_BUCH-817-005.book Page 15 Tuesday, May 6, 2014 10:15 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch GLL 2-50 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info