Bedienungsanleitung Bosch GLL 3-80 C (Seite 25 von 317) (Alle Sprachen)

786291

Zoom out

Zoom in

Vorherige Seite

1/317

Nächste Seite

English | 25

Roughly align the tripod before switching on the measuring

tool.

Securing with the universal holder (accessory)

(seefigureC)

You can secure the measuring tool, for example, on vertical

surfaces or magnetisable materials using the universal

holder(25). The universal holder is also suitable for use as a

floor stand and facilitates the height adjustment of the meas-

uring tool.

uKeep your fingers away from the rear side of the mag-

netic accessory while attaching the accessory to sur-

faces. The strong pulling force of the magnets may jam

your fingers.

Roughly align the universal holder(25) before switching on

the measuring tool.

Working with the laser receiver (accessory)

(see figureC)

Use the laser receiver (29) to improve detection of the laser

lines in adverse lighting conditions (bright environment, dir-

ect sunlight) and over greater distances. When working with

the laser receiver, switch on receiver mode (see "Receiver

Mode", page22).

Laser Goggles (Accessory)

The laser goggles filter out ambient light. This makes the

light of the laser appear brighter to the eye.

uDo not use the laser goggles (accessory) as protective

goggles. The laser goggles make the laser beam easier to

see; they do not protect you against laser radiation.

uDo not use the laser goggles (accessory) as

sunglasses or while driving. The laser goggles do not

provide full UV protection and impair your ability to see

colours.

Example applications (see figuresB–G)

Examples of possible applications for the measuring tool can

be found on the graphics pages.

Maintenance and Service

Maintenance and Cleaning

Keep the measuring tool clean at all times.

Never immerse the measuring tool in water or other liquids.

Wipe off any dirt using a damp, soft cloth. Do not use any de-

tergents or solvents.

The areas around the outlet aperture of the laser in particular

should be cleaned on a regular basis. Make sure to check for

lint when doing this.

Only store and transport the measuring tool in the protective

bag(31) or the case(34).

If the measuring tool needs to be repaired, send it off in the

protective bag(31) or the case(34).

After-Sales Service and Application Service

Our after-sales service responds to your questions concern-

ing maintenance and repair of your product as well as spare

parts. You can find explosion drawings and information on

spare parts at: www.bosch-pt.com

The Bosch product use advice team will be happy to help you

with any questions about our products and their accessor-

ies.

In all correspondence and spare parts orders, please always

include the 10‑digit article number given on the nameplate

of the product.

Great Britain

Robert Bosch Ltd. (B.S.C.)

P.O. Box 98

Broadwater Park

North Orbital Road

Denham Uxbridge

UB 9 5HJ

At www.bosch-pt.co.uk you can order spare parts or arrange

the collection of a product in need of servicing or repair.

Tel. Service: (0344) 7360109

E-Mail: boschservicecentre@bosch.com

You can find further service addresses at:

www.bosch-pt.com/serviceaddresses

Transport

The recommended lithium-ion batteries are subject to legis-

lation on the transport of dangerous goods. The user can

transport the batteries by road without further require-

ments.

When shipping by third parties (e.g.: by air transport or for-

warding agency), special requirements on packaging and la-

belling must be observed. For preparation of the item being

shipped, consulting an expert for hazardous material is re-

quired.

Dispatch battery packs only when the housing is undam-

aged. Tape or mask off open contacts and pack up the bat-

tery in such a manner that it cannot move around in the

packaging. Please also observe the possibility of more de-

tailed national regulations.

Disposal

Measuring tools, rechargeable/non-re-

chargeable batteries, accessories and pack-

aging should be sorted for environmental-

friendly recycling.

Do not dispose of the measuring tools or bat-

tery packs/batteries with household waste.

Only for EU countries:

According to the Directive 2012/19/EU on waste electrical

and electronic equipment and its transposition into national

law, measuring tools that are no longer usable, and, accord-

ing to the Directive 2006/66/EC, defective or drained bat-

teries must be collected separately and disposed of in an en-

vironmentally correct manner.

If disposed incorrectly, waste electrical and electronic

equipment may have harmful effects on the environment and

Bosch Power Tools 1 609 92A 7GY | (21.04.2022)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch GLL 3-80 C Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info