591844
9
Zoom out
Zoom in
Vorherige Seite
1/92
Nächste Seite
English | 9
Bosch Power Tools 1 619 929 L07 | (16.10.12)
Entsorgung
Bohrständer, Zubehör und Verpackungen sollen einer um-
weltgerechten Wiederverwertung zugeführt werden.
Nur für EU-Länder:
Gemäß der Europäischen Richtlinie
2002/96/EG über Elektro- und Elektronik-
Altgeräte und ihrer Umsetzung in nationales
Recht müssen nicht mehr gebrauchsfähige
Elektrowerkzeuge getrennt gesammelt und
einer umweltgerechten Wiederverwertung
zugeführt werden.
Änderungen vorbehalten.
English
Safety Notes
Read all safety warnings and instruc-
tions provided with the drill stand and
the drill. Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “drill” in the warnings refers to your mains-operated
(corded) drill or battery-operated (cordless) drill.
Powerful magnet!
Persons with cardiac pacemakers or oth-
er medicinal implants may not use this
drill stand.
Carrying along metal parts and watches
is prohibited.
Pull the plug from the socket outlet and/or remove the
battery before carrying out adjustments on the power
tool or replacing accessory parts. Unintentional starting
of drills is the cause of some accidents.
Assemble the drill stand properly before mounting the
drill. The correct assembly is important in order to ensure
proper function.
Before using, fasten the drill securely to the drill stand.
An unsecured drill in the drill stand can lead to loss of con-
trol.
The power tool should always be carried by two per-
sons in order to avoid back injuries.
When using the drill stand for overhead applications,
two persons are always required.
When drilling overhead or on surfaces that are not hor-
izontal, secure the drill stand with a safety chain. In
case of a power failure or excessive load, the holding force
of the magnet is not maintained. The drill stand can fall
down and cause accidents.
Danger of the drill stand falling down due to sudden
pendular motion of the drill stand. When working on a
scaffold, the drill stand can be subject to a sudden pendu-
lar motion when the drill starts or in case of a power failure.
Secure the drill stand with the provided safety chain. Se-
cure yourself against falling down by applying a safety
rope/belt.
Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
Connect the drill stand to a properly earthed mains
supply. The socket outlet and the extension cable must be
equipped with an operative protective conductor.
Keep the connection cable of the drill away from the
working area. Damaged or entangled cables increase the
risk of an electric shock.
The surface must be smooth and clean. Smooth out
coarse irregularities, e. g., welding spatter and remove
loose rust, dirt and grease. The holding force of the mag-
net applies only for appropriate surfaces.
Maintain the drill stand with care. Check for misalign-
ment or binding of moving parts, breakage of parts and
any other condition that may affect the function of the
drill stand. Have damaged parts repaired before using
the drill stand. Many accidents are caused by poorly main-
tained devices.
Have your drill stand serviced/repaired only by a quali-
fied repair person using original replacement parts.
This will ensure that the safety of the device is maintained.
The safety warnings and working instructions for the
drill as well as for the drilling tools and accessories be-
ing used are to be strictly observed!
Products sold in GB only: Your product is fitted with an
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Products sold in AUS and NZ only: Use a residual current de-
vice (RCD) with a rated residual current of 30 mA or less.
WARNING
OBJ_BUCH-1761-001.book Page 9 Tuesday, October 16, 2012 1:32 PM
9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Bosch GMB 32 Professional wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info