Bedienungsanleitung Bosch GMS 100 M Professional (Seite 12 von 130) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

592027

Zoom out

Zoom in

Vorherige Seite

1/130

Nächste Seite

12 | English

1 609 929 Y44 | (10.5.11) Bosch Power Tools

Working Advice

f Measuring values can be impaired through certain am-

bient conditions. These include, e.g., the proximity of

other equipment that produce strong magnetic or elec-

tromagnetic fields, moisture, metallic building materi-

als, foil-laminated insulation materials or conductive

wallpaper or tiles. Therefore, please also observe other

information sources (e.g. construction plans) before drill-

ing, sawing or routing into walls, ceilings or floors.

Marking Objects

If required, detected objects can be marked. Perform a meas-

urement as usual. Once you have found the boundaries or the

centre of an object, mark the sought location through the

marking hole 2.

Temperature Control

The measuring tool is equipped with a temperature control in-

dicator, as accurate measurements are only possible as long

as the temperature within the measuring tool remains con-

stant.

When the temperature control indicator f lights up, the meas-

uring tool is not within the operating temperature range or

was subject to large variations in temperature. Switch the

measuring tool off and allow it to adjust to the ambient

temperature before switching it on again.

Warning Function

When indicator b lights up on the display, the measurement

must be restarted. Remove the measuring tool from the wall

and place it on the base material at a different location.

When indicator b flashes on display 3, send the measuring

tool to an authorised customer services agent.

Recalibration

When the main scale h indicates a continuously high ampli-

tude, even though there is no object near the measuring tool,

the measuring tool can be manually recalibrated.

– Switch the measuring tool off.

– Remove all objects near the measuring tool that could be

detected, including your wrist watch or rings made of

metal, and hold the measuring tool up.

Pay attention that battery indicator g indicates at least 1/3

capacity:

– Switch the measuring tool on again. When the measuring

tool starts, immediately press and hold the the On/Off but-

ton 4. Hold the On/Off button until the illuminated ring 1

slowly flashes red, indicating the calibration of the measur-

ing tool.

– When the calibration was successful, ring 1 lights up green

and the measuring tool automatically ready for operation

again.

Note: If the measuring tool does not automatically start, re-

peat the recalibration. If the measuring tool still does not

start, send it to an authorised customer services agent.

Maintenance and Service

Maintenance and Cleaning

f Check the measuring tool each time before use. In case

of visible damage or loose components inside the measur-

ing tool, safe function can no longer be ensured.

Keep the measuring tool clean and dry at all times to ensure

proper and safe working.

Do not immerse the measuring tool in water or other fluids.

Wipe away debris or contamination with a dry, soft cloth. Do

not use cleaning agents or solvents.

In order not to affect the measuring function, decals/stickers or

name plates, especially metal ones, may not be attached in the

sensor area 6 on the front or back side of the measuring tool.

Do not remove the contact pads 5 on the backside of the

measuring tool.

If the measuring tool should fail despite the care taken in man-

ufacturing and testing procedures, repair should be carried

out by an authorised after-sales service centre for Bosch pow-

er tools. Do not open the measuring tool yourself.

In all correspondence and spare parts orders, please always

include the 10-digit article number given on the type plate of

the measuring tool.

After-sales Service and Customer Assistance

Our after-sales service responds to your questions concern-

ing maintenance and repair of your product as well as spare

parts. Exploded views and information on spare parts can

also be found under:

www.bosch-pt.com

Our customer service representatives can answer your ques-

tions concerning possible applications and adjustment of

products and accessories.

Great Britain

Robert Bosch Ltd. (B.S.C.)

P.O. Box 98

Broadwater Park

North Orbital Road

Denham

Uxbridge

UB 9 5HJ

Tel. Service: +44 (0844) 736 0109

Fax: +44 (0844) 736 0146

E-Mail: boschservicecentre@bosch.com

Ireland

Origo Ltd.

Unit 23 Magna Drive

Magna Business Park

City West

Dublin 24

Tel. Service: +353 (01) 4 66 67 00

Fax: +353 (01) 4 66 68 88

OBJ_BUCH-1418-002.book Page 12 Tuesday, May 10, 2011 8:18 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch GMS 100 M Professional Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info