Bedienungsanleitung Bosch GOP 250 CE (Seite 14 von 199) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

544113

Zoom out

Zoom in

Vorherige Seite

1/199

Nächste Seite

14 | English

2 609 932 802 | (14.2.12) Bosch Power Tools

authorised customer service agent. The replacement plug

should have the same fuse rating as the original plug.

The severed plug must be disposed of to avoid a possible

shock hazard and should never be inserted into a mains

socket elsewhere.

Products sold in AUS and NZ only: Use a residual current

device (RCD) with a rated residual current of 30 mA or less.

Product Description and

Specifications

Read all safety warnings and all instruc-

tions. Failure to follow the warnings and in-

structions may result in electric shock, fire

and/or serious injury.

While reading the operating instructions, unfold the graphics

page for the machine and leave it open.

Intended Use

The machine is intended for sawing and cutting wooden mate-

rials, plastic, gypsum, non-ferrous metals and fastening ele-

ments (e.g., unhardened nails, staples). It is also suitable for

working soft wall tiles, as well as for dry sanding and scraping

of small surfaces. It is especially suitable for working close to

edges and for flush cutting. Operate the power tool exclusive-

ly with Bosch accessories.

Product Features

The numbering of the product features refers to the illustra-

tion of the machine on the graphics page.

1 On/Off switch

2 Thumbwheel for orbit frequency preselection

3 Venting slots

4 Tool holder

5 Handle (insulated gripping surface)

6 Plunge saw blade*

7 Clamping bolt with spring washer (GOP 250 CE)

8 Allen key

9 Adapter for tool holder (GOP 250 CE)

10 Sanding plate*

11 Sanding sheet*

12 SDS lever for releasing the application tool

(GOP 300 SCE)

13 Felt ring of the dust extraction*

14 Retaining clip of the dust extraction*

15 Vacuum connection*

16 Dust extraction*

17 Vacuum hose*

18 Extraction adapter*

*Accessories shown or described are not part of the standard de-

livery scope of the product. A complete overview of accessories

can be found in our accessories program.

Technical Data

Noise/Vibration Information

Multi-Cutter GOP 250 CE GOP 300 SCE

Article number

3 601 B30 0.. 3 601 B30 5..

Preselection of orbital stroke rate

z z

Rated power input

W250300

Output power

W150180

No-load speed n

min

-1

8000–20000 8000–20000

Oscillation angle, left/right

°1.41.4

Weight according to EPTA-Procedure 01/2003

kg 1.5 1.6

Protection class

/II /II

The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.

GOP 250 CE GOP 300 SCE

Measured sound values determined according to EN 60745.

Typically the A-weighted noise levels of the product are

Sound pressure level

Sound power level

Uncertainty K=

Wear hearing protection!

dB(A)

OBJ_BUCH-1271-004.book Page 14 Tuesday, February 14, 2012 11:38 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch GOP 250 CE Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info