Bedienungsanleitung Bosch GOP 30-28 Professional (Seite 17 von 304) (Alle Sprachen)

640564

Zoom out

Zoom in

Vorherige Seite

1/304

Nächste Seite

English | 17

Bosch Power Tools 1 609 92A 18M | (14.12.15)

Safety Warnings for Multi-Cutters

 Hold power tool by insulated gripping surfaces, when

performing an operation where the cutting accessory

may contact hidden wiring or its own cord. Cutting ac-

cessory contacting a “live” wire may make exposed metal

parts of the power tool “live” and could give the operator an

electric shock.

 Use the machine only for dry sanding. Penetration of wa-

ter into the machine increases the risk of an electric shock.

 Caution, fire hazard! Avoid overheating the object be-

ing sanded as well as the sander. Always empty the

dust collector before taking breaks. In unfavourable

conditions, e. g., when sparks emit from sanding metals,

sanding debris in the dust bag, micro filter or paper sack

(or in the filter sack or filter of the vacuum cleaner) can

self-ignite. Particularly when mixed with remainders of var-

nish, polyurethane or other chemical materials and when

the sanding debris is hot after long periods of working.

 Keep hands away from the sawing range. Do not reach

under the workpiece. Contact with the saw blade can

lead to injuries.

 Use suitable detectors to determine if utility lines are

hidden in the work area or call the local utility company

for assistance. Contact with electric lines can lead to fire

and electric shock. Damaging a gas line can lead to explo-

sion. Penetrating a water line causes property damage or

may cause an electric shock.

 When working with the machine, always hold it firmly

with both hands and provide for a secure stance. The

power tool is guided more secure with both hands.

 Secure the workpiece. A workpiece clamped with clamp-

ing devices or in a vice is held more secure than by hand.

 Wear protective gloves when changing application

tools/accessories. Application tools/accessories become

hot after prolonged usage.

 Do not scrape wetted materials (e.g. wallpaper) or on

moist surfaces. Penetration of water into the machine in-

creases the risk of an electric shock.

 Do not treat the surface to be worked with solvent-con-

taining fluids. Materials being warmed up by the scraping

can cause toxic vapours to develop.

 Exercise extreme caution when handling the scraper.

The accessory is very sharp; danger of injury.

 Products sold in GB only: Your product is fitted with a

BS 1363/A approved electric plug with internal fuse

(ASTA approved to BS 1362).

If the plug is not suitable for your socket outlets, it should

be cut off and an appropriate plug fitted in its place by an

authorised customer service agent. The replacement plug

should have the same fuse rating as the original plug.

The severed plug must be disposed of to avoid a possible

shock hazard and should never be inserted into a mains

socket elsewhere.

Products sold in AUS and NZ only: Use a residual current

device (RCD) with a rated residual current of 30 mA or

less.

Product Description and

Specifications

Read all safety warnings and all instruc-

tions. Failure to follow the warnings and in-

structions may result in electric shock, fire

and/or serious injury.

While reading the operating instructions, unfold the graphics

page for the machine and leave it open.

Intended Use

GOP 30-28/GOP 40-30/GOP 55-36

The machine is intended for sawing and cutting wooden mate-

rials, plastic, gypsum, non-ferrous metals and fastening ele-

ments (e. g., unhardened nails, staples). It is also suitable for

working soft wall tiles, as well as for dry sanding and scraping

of small surfaces. It is especially suitable for working close to

edges and for flush cutting. Operate the power tool exclusive-

ly with Bosch accessories.

GOP 40-30

The light of this power tool is intended to illuminate the power

tool’s direct area of working operation and is not suitable for

household room illumination.

Product Features

The numbering of the product features refers to the illustra-

tion of the machine on the graphics page.

1 On/Off switch

2 Thumbwheel for orbit frequency preselection

3 Venting slots

4 Tool holder

5 Plunge saw blade*

6 Clamping bolt (GOP 30-28)

7 Hex key (GOP 30-28)

8 Dust extraction*

9 Sanding plate*

10 Sanding sheet*

11 Handle (insulated gripping surface)

12 SDS lever for releasing the application tool

(GOP 40-30/GOP 55-36)

13 Worklight (GOP 40-30)

14 Clamping lever of the depth stop*

15 Depth stop*

16 Clamping lever of the dust extraction*

17 Vacuum connection*

18 Tool sleeve*

19 Vacuum hose*

*Accessories shown or described are not part of the standard de-

livery scope of the product. A complete overview of accessories

can be found in our accessories program.

OBJ_BUCH-2566-001.book Page 17 Monday, December 14, 2015 4:27 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch GOP 30-28 Professional Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info